Installation Manual RESU 13
Table Of Contents
- About this manual
- 1 Safety
- 2 Product Introduction
- 3 Installation Prerequisites
- 4 Battery Pack Installation
- 5 RESU Plus Installation
- 6 Configuration Switches
- 7 Commissioning
- 8 Troubleshooting
- 9 Firmware Update
- 10 Warranty
- 11 Certifications
- A Compatible Inverters
- B Supported Memory Cards
13
Product Introduction
2.3 RESUlineup
There are three RESU battery pack models.
ON
OFF
CONNECTION KIT
ON
OFF
CONNECTION KIT
ON
OFF
CONNECTION KIT
RESU3.3 RESU6.5 RESU10 RESU13
For details about these models, see Technical data onpage10.
2.4 RESU Plus
The RESU battery pack can be used in combination of up to 2 units.
• RESU3.3 + RESU3.3
• RESU3.3 + RESU6.5
• RESU3.3 + RESU10
• RESU6.5 + RESU6.5
• RESU6.5 + RESU10
• RESU10 + RESU10
• RESU13 + RESU13
(only RESU13s can be used in combination)
ON
OFF
CONNECTION KIT
A unit of RESU Plus, which is sold separately, is required to install two RESU battery packs.
Two battery packs are connected to an inverter via a RESU Plus.