Specifications

37
Watching TV
A-TV (Analogue)/D-TV (Digital) buttons
A-TV: Press to switch to analogue TV mode. After
switching from digital TV or external input mode to
analogue TV mode, the TV jumps to the most recently
viewed analogue channel.
D-TV: Press to switch to digital TV mode. After
switching from analogue TV or external input mode
to digital TV mode, the TV jumps to the most recently
viewed digital TV channel.
When you watch the TV for the fi rst time
When the TV powers on for the fi rst time after
purchase, perform the auto installation.
A-TV (Analogue TV)
You can run the auto installation to set channels
automatically.
To watch the analogue TV, select “Auto
Installation” from Setup menu. (See page 18.)
1
D-TV (Digital TV)
When the TV accesses to D-TV mode for the fi rst time,
you need to run the auto search. To scan all available
services in your area, follow the procedures below.
After setting the channels, you can select
a channel using CH r/s or 0-9 on the
remote control unit. (See page 19.)
2
To watch D-TV broadcasts, select “Auto
Search” from “D-TV Menu”. (See page 43.)
1
After setting the channels, you can select
a channel using CH r/s or 0-9 on the
remote control unit. (See page 19.)
2
Use the following buttons on the remote control to
operate the menu.
42D65H_en_f.indd 3742D65H_en_f.indd 37 11/7/08 9:42:08 AM11/7/08 9:42:08 AM