ECO Declaration

Annex B1 of ECMA-370 6
th
edition Page 4 (6)
Model number *
MX-C357F
Logo
Issue date *
15th, April 2020
Product environmental attributes - Market requirements (continued) Requirement met
Item
Yes
No
n.a.
Material and substance requirements (continued)
P7.21*
Biobased plastic material content is used in the product (See NOTE B7):
If YES; at least one of the two alternatives below shall be answered;
a) Of total plastic parts’ weight > 25 g, the biobased plastic material content (calculated as a percentage of
total plastic by weight) is %.
or
b) The weight of the biobased plastic material is g.
P7.22*
Light sources are free from mercury, i.e. less than 0,1 mg/lamp.
If mercury is used specify: Number of lamps: and maximum mercury content per lamp: mg
P7.23*
If product includes an integral display, the total mercury content in the integrated display: mg
P8
Batteries
P8.1*
Battery chemical composition: LiMnO2
P9
Energy consumption (See NOTE B8)
P9.1
For the product the following power levels or energy consumptions are reported:
Energy mode *
Power level at
100 V AC
Power level at
115 V AC
Power level at
230 V AC
Reference/Standard for energy
modes and test method *
Sleep mode for ENERGY
STAR® Operational Mode
(OM) products
W
W
W
Standby/off mode for
ENERGY STAR Operational
Mode (OM) products
W
W
W
TEC value for ENERGY STAR
TEC products (TEC= Typical
Energy Consumption)
kWh/week
kWh/week
1.3 kWh/week
※
Energy Star (ver. 2.0)
Highest possible power
consumption
W
W
1190 W
Operating mode
W
W
485 W
Ready mode
W
W
27.5 W
Energy Saving Mode A
W
W
24.5 W
Energy Saving Mode B
W
W
1.8 W
Plug-in off mode
W
W
0.1 W
External Power Supply Efficiency Level (International Efficiency Marking Protocol) * :
Print/Scan Speed * : 35 images per minute
Color/Monochrome
Default time to enter energy save mode: 15 minutes
P9.2*
Information about the energy save function is provided with the product.
P10
Emissions (See NOTE B8)
Noise emission – Declared according to ISO 9296 (See NOTE B9)
P10.1
Mode
Mode description
Statistical upper limit A-weighted sound power level,
L
WA,c
(B)
Idle
* Idle/Ready
* 3.1
Operation
* Duplex Monochrome Printing
* 6.7
Other mode
Simplex Monochrome Printing
6.7
Measured according to: ISO7779 ECMA-74
Other (only if not covered by ECMA-74 with L
pAm
measurement distance m)
NOTE B6 Applies to a product containing plastic parts whose combined weight exceeds 100 g with the exception of
printed circuit boards, cables, connectors and electronic components and bio-based plastic material.
NOTE B7 The following is to be excluded from the calculation of percentage: printed circuit boards, labels, cables,
connectors and electronic components and postconsumer recycled plastic.
NOTE B8 A Guidance document on Energy efficiency is available;
see http://www.ecma-international.org/publications/standards/Ecma-370.htm
.
※
The above TEC value meets TEC Requirement of
ENERGY STAR for Imaging Equipment Version 2.0 .