Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- IMPORTANT SAFETY INSTRUCTIONS
- QUICK REFERENCE
- Contents
- COPYRIGHT AND LICENSE NOTICE
- Supplied accessories
- Trademarks
- Part names
- Preparation
- Watching TV
- Basic adjustment settings
- Using external equipment
- Useful adjustment settings
- Image position
- Moving the picture on the screen
- Input Select
- Input Label
- Picture Flip
- AV MODE
- View mode for 4:3 Programs
- View mode for HD Programs
- Digital Noise Reduction
- Audio Only
- Output Select
- Quick Shoot
- Color System
- Sleep Timer
- Program Title Display
- Closed Captions and Digital Closed Captions
- Caption Setup
- Secret number setting for parental control
- Parental control (setting V-CHIP level)
- How to temporarily release the V-CHIP BLOCK
- Reactivating the temporarily released V-CHIP BLOCK
- Other viewing options
- Appendix
- Dimensional drawings
33
Useful adjustment settings
Input Select
Press MENU and the MENU screen displays.
1
2
3
Press c/d to select “Option”.
Press a/b to select “Input Select”, and then
press ENTER.
Press INPUT.
• A list of selectable sources appears.
Press INPUT again to select the input source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
• If the corresponding input is not plugged in,
you cannot change the input. Be sure to
connect the equipment beforehand.
1
2
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1 and INPUT 2 terminals.
4
Press a/b to select a signal type you want
to set, and then press ENTER.
• If the selected signal type is incorrect, images
are not displayed or displayed without any
color.
NOTE
• If you set INPUT1 and INPUT2 to Auto, the TV will
automatically select the input signal.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to “Auto”
when other equipment is connected will result in the
following connectivity priority.
Selecting input source
Use this menu to select the input source.
INPUT 1 and INPUT 2
1. COMPONENT VIDEO
2. VIDEO