SHARR OS AQU LC-70LE732 LC-70LE632U LC-60LE632 LiQUiD CRYSTAL TELEViSiON TfLI"=VISEUR TELEVI= 0PERJ M( MJ mOOLB_ DIGITAL _ ON DEMAND _0_ 1245 PLUS I H_NI| ., ...... ,NITION MULTIMEDIA TM ,........ DI_+ HD ALPHALINE @napsfero ° _[_"_ IMPORTANT • Please read this operation _-_-_-_ IMPORTANT IMPORTANTE Veuillezlirecemoded'emploiavantdecommencer&utiliserl'appareil. • Lea este manual de operaciGn antes de comenzar a operar el equipo.
LC-70L LC-70L LC-60L 732L! LiQUiD CRYSTAL TELEViSiON ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear and right side of the TV. iMPORTANT WARNING: Model No.: Serial No.: iNFORMATiON TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
iMPORTANT iNFORMATiON CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-70LE732U/LC-70LE632U/LC-60LE632U This device complies with Part 15 of the FCC Rules.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp of trouble-free operation of your product, using this product. iMPORTANT Liquid please Crystal Television. read the important To ensure safety and many years Safety instructions carefully before SAFETY iNSTRUCTiONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
iMPORTANT SAFETY iNSTRUCTiONS Outdoor Antenna Grounding - If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
iMPORTANT SAFETY iNSTRUCTiONS Caring for the front panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. i i} '_ • Wiping with a hard cloth or using strong force may scratch the surface of the front panel. L_..
Contents iMPORTANT iNFORMATiON ..................... DEAR SHARP CUSTOMER ....................... iMPORTANT SAFETY iNSTRUCTiONS ........ Supplied Accessories 1 3 3=5 ............................ 7 QUICK REFERENCE Attaching the Stand ............................ QUICK INSTALLATION TIPS ................... Experiencing HD Images ....................... Using the Remote Control Unit ................. 7 8 8 8 Preparation Antennas .......................................
Supplied Accessories Make sure the following Remote control unit (x 1) Page 8 accessories are provided with the product. "AAA" size battery (x 2) Page 9 Stand unit (x 1) Page 7 Operation manual (x 1) Connection guide (x 1) ,., .......... J Always use the AC cord supplied with the TV. The illustrations above are for explanation purposes and may vary slightly from the actual accessories. QUICK REFERENCE 0 b,,...... o Before attaching (or detaching) the stand, unplug the AC cord.
QUICK REFERENCE 1 Attach your antenna (See page 9.) 2 Connect outlet. to the back of the television. the AC plug for the television into the AC LC=70LE732U/LC-70LE632U An HDTV without an HD source is just an ordinary TV.
Preparation To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm plug it into the antenna terminal at the rear of the TV set. For connecting commercially available cables.
Part Names OPC sensor * Center Icon illumination (See page 32.) Remote control sensor * OPC: Optical Picture Control (See page 26.
Part Names 1 1 POWER: Switch the TV power on or enter standby. (See page 17.) 2 TV, STB, DVDoVCR, AUDIO: Switches the remote control for TV, STB, BD, DVD, VCR and AUDIO operation. (See pages 49 to 50 for details.) 18 * To enter the code registration mode, you need to press an appropriate button (STB, DVDoVCR or AUDIO) and DISPLAY at the same time. 19 20 21 3 External equipment external equipment. operational buttons: Operate the 4 OPTION: Display the Link Operation Menu screen.
introduction to Connections For connecting the "IV to external equipment, use commercially available cables. . The illustrations of the terminals are for explanation purposes and may vary slightlyfrom the actual products. II Connecting to video equipment or PC Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external equipment and use its appropriate terminals for higher quality images.
Connecting to E×ternal Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 12 and 21 .) For connecting the TV to external equipment, use commercially available cables. To protect equipment, always turn off the TV before connecting any external equipment. Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting When to using E×ternal Component Equipment cable (COMPONENT}: Component video cable To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component cable and set the equipment to 1080p output. See page 13 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to the HDMI terminal. m When using Composite VIDEO (Yellow) AUDIO-L (White) _.
Connectingto ExternalEquipment When connecting an AV amplifier for surround system HD Cable/Satelliteset-top box HDMI-certified cable "1 Letting the TV output the audio to an AV amplifier: "1 When you connect ARC-compatible equipment, use the HDMI 1 terminal. *2 If the equipment to be connected is not compatible with the ARC, connect an optical fiber cable. Ifthe image is not in sync with the audio, check the settings of the connected surround system.
Connecting to E×tema( Equipment Refer to page 56 for a list of PC signals compatible with the TV. When using HDMI cable (HDMI 1 2, 3 or 4): HDMI-certified cable Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to the HDMI 1 terminal, connect a © 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMl+Analog". (See page 56.) • The HDMI terminals only support digital signal.
Watching TV m POWER c z c A c_ When you turn on the TV for the first time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit. 1. Insertthe batteriesintothe remotecontrolunit. (Seepage9.) 2. Connect the antenna cable to the TV. (Seepage 9.) 3. Plug in the AC cord to the AC outlet. (See page 8.
Watching TV Antenna & Cable/STB Select the type of connection you will use to watch T_. 3 Press 4/_ to select "Antenna & Cable" or "Settop box", and then press ENTER. To watch TV via an antenna or cable connection (without using a set-top box): Select "Antenna & Cable", and then go to step 4. To watch TV via a set=top box: (i._ Select "Set-top box", and then press ENTER. (9 To watch TV, select the input source corresponding to the terminal connected to the set-top box.
Watching TV Completed 6 The settings confirmation screen is displayed. Confirm the information displayed on the screen, and then press ENTER. Examples of the settings confirmation screen When one or more channel is received after "Antenna & Cable" was selected in step 3 and a search was carried out. When no channel is received after "Antenna & Cable" was selected in step 3 and a search was carried out. When "Set-top box" was selected in step 3 and a search was carried out.
Direct Button Operation OPTION SLEEP POWER SAVING FREEZE Mutes the current sound output. Press MUTE. "C_)" will be displayed on the screen for 30 minutes,and the sound is silenced. AQUOS NET CO APPS Within 30 minutes of pressing MUTE, mute can be canceled by pressing VOL+/or MUTE, Mute will be canceled after 30 minutes have passed. However, the TV will not suddenly output a loud sound as the volume level is set to 0 automatically. AVMODE VIEWMODEFLASHBACK You can change channels in several ways.
Direct Button Operation AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. 1 Press INPUT. = The INPUT list screen displays. 2 Press AV MODE. Current AV MODE displays.
Direct Button Operation Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider).
Direct CO Button Operation AV MODEVIEWMODEFLASHBACK CZl EZI You can select the screen size. _ 1 Press VIEW MODE. o The View Mode menu displays, The menu lists the View Mode options selectable for the type of video signal currently being received, 2 Press VIEW MODE or A/T while the View Mode menu is displayed to select a desired item on the menu. AQUOS NET APPS 0 0 • You can sequentially select a View Mode that has its own aspect ratio.
On=Screen Display Menu LCFONT embedded Example Exarnple ® ® ® 1 Press MENU 2 (i_ Press to display the MENU screen. _1/_- to select the desired (2} Press A/V to select a specific and then press ENTER. menu. adjustment item, o Additional related adjustment items may be displayed. Press A/Y to select the desired item. (_ Adjust the item while referring display. to the guide • Operations vary depending on the function or item.
On=Screen Display Menu o When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be changed. o Some menu items may not be displayed depending on the selected input source. Picture Settings AV MODE (Changing Pic.Quality) ..... Page 26 OPC ................................................ Page 26 Backlight ......................................... Page 26 Contrast .......................................... Page 26 Brightness ......................
On=Screen Display Menu The audio and video settings can be changed to suit the program or input content being watched. Select from the following AV modes. Adjusts the picture to your preference with the following picture settings. Example CO AVMODE VIEWMODEFLASHBACK E::::3_ C:Z3C::3 m When the input source is TV, COMPONENT, VIDEO 1 or 2: AUTO/STANDARD/MOVIE/GAME/USER/DYNAMIC/ DYNAMIC(Fixed) When the input source is PC IN or HDMI 1 to 4: LC-70LE732U AUTO/STAN DARD/MOVIE/GAM E/PO/USER/x.v.
On=Screen Display Menu You can set the color gamut range. Standard" Standard color gamut. Expanded: More vivid colors with expanded color gamut. o "Color Gamut Range" is only available when AV MODE is set to "MOVIE". Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality. Advanced(High)/Advanced(Low): Select a desired level to remove jerkiness from film contents.
On=Screen Display Menu You can adjust the sound quality to your preference with the following settings. Example Different sound sources sometimes do not have the same loudness level, such as a program and its commercial breaks. The Automatic Volume Control (Auto Volume) reduces this problem by equalizing levels. High: Reducing the loudness gaps among different sound sources strongly. Middle: AQUOS NET APPS Low: Reducing the loudness gaps among different sound sources slightly.
On=Screen Display Menu Power control setting allows you to save energy. Example OPTION SLEEP EZ3 CZ3 r-q POWER SAVING FREEZE CZ3 AQUOS NET APPS 1 Press MENU to display the MENU screen, and then press _1/1_ to select "Power Control". 2 Press A/V to select a specific adjustment item, and then press ENTER. 3 Press A/T (or 4t/1_) to select the desired setting, and then press ENTER. 4 Press MENU to exit. • Skip this step for "Audio Only".
On=Screen Display Menu i_ii_i_i_ii_!_!_!_IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII: ¸_i_l_l_l_l__ll_l_.......... Allows you to capture and freeze a moving image that you are watching. Example You can select Freeze by pressing FREEZE on the remote control unit. See page 20 for details of Freeze function. Allows you to change the audio when multiple audio is available for the program you are watching.
On=Screen Display Menu Allows you to change the Closed Caption display. Select "Change CC" on the menu to display the Closed Caption information. o The informationdisplayed variesdepending on the program you are watching. You can change Closed Caption by pressing CO on the remote control unit. See page 22 for details of Closed Caption function. Allows you to select what controls the audio output. Fixed: Sound via speaker is adjusted with VOL +/on the remote control unit or on the TV.
On=Screen Display Menu This function allows you to adjust the closed caption screen appearance to suit your preference. You can adjust 7 items: "Caption Size", "Font Style", "Foreground Color", "Foreground Opacity", "Background Color", "Background Opacity" and "Character Edge". Example: Selectabie items available for "Font Style". Default: The font specified by broadcasting station or default font. Type 0: Proportional font used in the MENU screen. Type 1" Monospaced with serifs.
On=Screen Display Menu Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all channels viewable in the set area. ® If "Cable" is selected for Antenna setting, scrambled channels are removed after the Channel search has been completed, Completed: The settings confirmation screen is displayed. Confirm the information displayed on the screen.
On=Screen Display Menu This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. To register your favorite channel: If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. If you have alreadyset the Secret No., input the 4-digit secret number here. Select "Register" and then press ENTER.
On=Screen DisplayMenu TV Parental Guidelines V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV. "V-Chip" and "Status" will not be selectable from the menu if you do not first configure your secret number. = The U.S.
On=Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) o The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On=Screen Display Menu 2 Press A/T to select "Software Update", and then press ENTER. = Ifyou havealreadyset the Secret No., go to step 3. Example Example AQUOS NET APPS 1 Press MENU to display the MENU screen, and then press _1/1_ to select "Information". 2 Press A/V to select a specific adjustment item, and then press ENTER. 3 Press A/T (or 4t/1_) to select the desired setting, and then press ENTER. 4 Press MENU to exit. 3 Input the 4-digit secret number by using 0-9.
On=Screen Display Menu II Updating the Software via the Network 1 Press A/T on the Manual Update screen to select "Network Update", and then press ENTER. o The TV connects to the network and checks for updates. o To cancel, press ENTER. • Do not unplug the AC cord while the software being updated. is 4 When the software is successfully updated, a screen is displayed indicating that the update process is completed. A screen indicating that the update is completed is displayed.
On=Screen Display Menu 3 Press ENTER to start checking the data in the USB memory device. 4 During the data checking, "Checking" blinks. 5 To update the TV software with the update file, select "Yes", and then press ENTER. !! Example The current version of the TV software and the version of the update file on the USB memory device are displayed. Example Do not remove the USB memory device or unplug the AC cord while the software is being updated.
Enjoying Photo/Music/Video You can connect the TV to a USB memory viewing listening pictures, to music, device, and watching Playback USB hard drive or home network (DLNA) server to enjoy videos. o Depending on the USB memory device/USB hard drive/home network (DLNA) server, the TV may not be able to recognize the recorded data. o It may take time to read the recorded data if the USB memory device/USB hard drive/home network (DLNA) server contains many files or folders.
Enjoying Photo/Music/Video Playback T POWER DISPLAY (SOURCE) POWER C_ D TV STB CC3 C:3 C:3 m OPTION E:3 SLEEP DVD,VOR AUDIO C:3 _ Aooos EC3 EC3 _ NET APPS I OREC POWER SAVING FREEZE EC3 E:3 EC3 o You cannot switch the input mode if a USB memory device is not connected. o You do not need to select the drive/server in step 2 when there is only one drive in the connected USB memory device or there is only one home network (DLNA) server connected to the TV.
Enjoying Photo/Music/Video Playback The photo selected on the thumbnail selection screen is displayed. Buttons for individual display Example operation RETURN Go to the previous/next photo in the same directory. Return to the thumbnail selection screen. A (red} B (green} Rotate the photo by 90 degrees to the left. Rotate the photo by 90 degrees to the right. o Rotating photos only applies to the temporarily selected item and this setting is not saved. .
Enjoying Photo/Music/Video AQUOS ([_) NET A B Playback APPS C I Buttons for slide show BGM select operation A/y/41/_ Select a desired item. ENTER Play music. RETURN A (red} Return to the previous process. Select the music to be played back. Press this button to add or remove a checkmark. B (green} Stop music. O (blue} Play/Pause music. D (yellow} Display the USB MENU screen.
Enjoying Photo/Music/Video Playback AQUOS NET APPS I Example CC AVMODE VIEWMODEFLASHBACK A B C D Buttons for file selecting operations Example Buttons Buttons for music mode mode _t, Go to the beginning of a file by pressing A once and the previous file by pressing A twice, Play music. Y Go to the next file. A (red} Return to the previous process. Select the music to be played back. Press this button to add or remove a checkmark.
Enjoying Photo/Music/Video Playback m Using the operation panel You can use the operation panel for video playback operations. You can call up this operation panel by pressing MENU after you press A/_ to select "USB Operation Panel" from "System Options" > "View Option". Menu for file selecting operations Example * See page 43 for details on the Remove USB Device function. Hold down to go in reverse. I_ _. Starts playback, Hold down to fast forward.
Enjoying Photo/Music/Video Playback This is the function to confirm your registration code. You need to register the code at http://www.divx.com. 1 Press MENU to display the menu screen. 2 Press _/1_ to select "Initial Setup", and then press ENTER. 3 Press A/T to select "DivX® Setup", and then press ENTER. DivX ®VOD registration You can find your registration code on this menu. You need to register the TV at http://www.divx.com before playing the DivX content.
Enjoying Photo/Music/Video Playback The photo selected is displayed. AQUOS _ I Buttons for individual display selection screen operation APPS NET _/_. A on the thumbnail B C D RETURN Go to the previous/next photo in the same directory. Return to the thumbnail selection screen. A (red) B (green} Rotate the photo by 90 degrees to the left. Rotate the photo by 90 degrees to the right. o Rotating photos only applies to the temporarily selected item and this setting is not saved.
Enjoying Photo/Music/Video AQUOS NET Playback APPS Example Buttons Example A/T/4/II_ Select a desired item, When selecting a folder icon: Enter this directory. When selecting a video file: Play the video. RETURN Return to the previous process. ENTER When selecting a folder icon: Enter this directory. When selecting a music file: Play music. for playing mode A Go to the beginning of a file by pressing A once and the previous file by pressing A twice. Y Go to the next file.
Other Viewing Options You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, BD, DVD, LD) using the presetting manufacturer function of your remote control unit. 1 1-q _'PQWER To operate the connected equipment, press STB, DVD,VCR or AUDIO to select your device. (STB (cable/satellite set-top box), BD, DVD, VCR or AUDIO.) The remote control unit button will function as follows.
Other Viewing Options Manufacturer codes VCR BRAND AUDIO DYNAMICS BROCKSONIC CANON CRAIG CURTIS MATHIS DBX EMERSON GE iNSTANT REOLYA JC PENNEY JVC KENWOOD MAGNAVOX MAGNiN MEMOREX MONTGOMERY WARD NEC PANASONIC PENTAX PHILCO PHiLiPS QUASAR REALiSTiC SAMSUNG SHARP SONY SYLVANIA TATUNG TEAC TMK YAMAHA BD/DVD/LD DENON JVC KENWOOD MAGNAVOX MARANTZ MITSUBISHi PANASONIC PHILIPS PIONEER PROSCAN RCA SAMSUNG SHARP SONY TOSHIBA YAMAHA ZENITH BRAND REMOTE CONTROL NUMBER O9 13 04 12 04 O9 10, 13, 04 04 04 09, 16,
Using AQUOS LINK What's AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactivelyoperate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV. AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Using AQUOS LiNK This function can be set for each input terminal. On: The remote control unit of the TV can be used to select the channel, display program information, and perform other operations of a connected AQUOS LINK-compatible recorder. Off: This function does not work. Example AQUOS NET APPS This function allows you to listen to the TV audio via audio equipment without using an optical fiber cable, which conventionally is required.
Using AQUOS LiNK POWER DISPLAY(SOURCE) D POWER AQUOS NET TV STB APPS OVD.VCR AUDIO C::3 C_ CZD E_ c% _ _ _ OREC CD _ OPTION SLEEP POWER SAVING FREEZE _CZ3 This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing OREC on the remote control. Prepare the connected AQUOS LINK-compatible recorder for recording. Check the following items. o Make sure that the antenna cable is connected.
UsingAQUOS LiNK You can use the device operation panel to control playback operations. 1 Press OPTION to display the Link Operation Menu screen. 2 Press A/V to select "Device Operation Panel", and then press ENTER. 3 Press A/T/_I/I_ to select the desired operation. o This function works only when AQUOS LINK-compatible equipment with the Device Operation Panel function is connected. This section explains how to play back a title in the AQUOS LINK-compatible equipment.
Using a PC CC AVMODE VIEWMODEFLASHBACK You can select the screen size. 1 2 AQUOS NET APPS 0 0 MODE. o The View Mode menu displays. The menu lists the View Mode options seleetable for the type of video signal currently being received, Press VIEW MODE or &/T while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mode that has its own aspect ratio. Connect the PC before making adjustments. (See page 16.
Using a PC Example AQUOS NET APPS I This function audio. sets the terminal to output the computer The adjustment items vary depending on the input source. Select the input source corresponding to the terminal connected to the PC and then adjust the desired item. 1 Press MENU to display the MENU screen, and then press 4/1_ to select "System Options". 2 Press A/V to select "Input Terminal Setting", and then press ENTER. 3 Press A/T to select "PC input" or "Audio Select", and then press ENTER.
Using a PC • The TV can be controlled from a PC, control panels and other devices using the RS-232C or IP. Use a cross-type RS-232C cable, ETHERNET cable (commercially available) or wireless LAN for the connections. [] Communication conditions for RS=232C Set the RS-232C communication settings on the PC to match the TV's communication conditions.
Using a PC [] Command table • Commands not indicated here are not guaranteedto operate. CONTROL ITEM POWERONOOMMANDSETIING 0i ! ! Off The Power On command rejected. 1 i 2 i i i i i Or,[RS 2320] On [IP] The Power On command accepted. SELECTION TL_-'GGLE_ P i i The Power On command accepted. When the power is in standby mode, commands also go to waiting status and so power consumption is just about the same as usual.
Using the Internet By connecting your TV to a broadband • Display the latest Intemet information original home page*. Use "AQUOS ADVANTAGE LIVE" to You can enjoy a variety of streaming system, you can access the Intemet from the TV. and access a range of useful information for AQUOS users from the obtain the latest software and receive online user support. content and Intemet applications. * About the original home page The original home page is a website set up specifically for AQUOS owners.
Using the Internet m Using the wireless LAN This TV is equipped with a wireless LAN function. For a wireless LAN connection, you must use "Wireless Setup" to connect the access point and TV. (See page 61 .) Wireless LAN router/ access point PC Modem Internet o This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may result in radio communications that do not comply with regulations on radio communications. Therefore, do not use a separate wireless LAN adapter.
Using the Internet 5 to select "Push button", and then press 6 o To configure the setting via PC, select "PIN code". Follow the on-screen instructions and the operation manual of the access point to configure the settings. Select "Next" to complete the settings. 7 o The connection process starts and the WPS button on the access point can be pressed. Press the WPS button on the access point. Example AQUOS NET Press A/V ENTER. APPS o Pressing the WPS button displays a confirmation screen.
Usingthe Internet NET AQUOS APPS This function can be used to display up-to-date information on the original home page and allow you to receive support service over the network. | If you cannot connect to the Internet Perform the procedures below to check your TV's network settings. 1 Press EXIT to exit from the connected TV feature. 2 Press MENU to display the MENU screen, and then press 4/_ to select "Initial Setup". 3 Press A/V to select "lntemet Setup", and then press ENTER.
Using the Internet When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. o You can enter up to 128 characters for text. o Some special characters or diacritics may not be available depending on where you enter the text. -- The text you enter is displayed as you type it in. Press 4/_ to select the type of characters entered: alphabet, number or sign. (The selectable types depend on the input source.
Using the Internet AQUOS NET APPS ENTER, A/Y/4/_ o Press A/Y/4/I_ to select a link that you want to jump, and then press ENTER. About links • Web pages on the Internet often include "links" that allow you to jump to other web pages (or sites). "Links" can take various forms, including words or images, but they always work in the same way letting you jump to the link destination when you select them. Selected items (such as links of text input fields) are enclosed in a yellow frame.
Using the Internet You can use the toolbar to control the browser and to specify settings. AQUOS NET APPS You can use tabs to view up to 3 web pages at the same time. Each page appears in a separate tab, and you can switch between the tabs. 1 Press B on the remote control unit to display the Tab menu. o You can also display the Tab menu by clicking "_" the toolbar. in N FAV FA__ A 1 2 Press D on the remote toolbar. Press 4/1_ ENTER. B Select This Displays the web page in the selected tab.
Using the Internet Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. AQUOS NET APPS You can rearrange or delete the bookmarks. m Switching between the URL and title name 1 Press D on the remote control unit to display the toolbar. 2 Press 4/1_ to select "_" ¢_ A FAV APP B C D CDCD in the toolbar, and then press ENTER. Your bookmarks list is displayed.
Using the Intemet You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu. AQUOS NET A APPS B C D CDCD 1 Press D to display the toolbar. 2 Press 4/11_ to select "_" press ENTER. 3 Press 4/_ access. in the toolbar, and then to select the settings menu you want to Security: Save Setting: If you select this option, a message is displayed when you move from a protected page to an unprotected page.
Using the Internet Example By connecting the TV to the Internet, you can enjoy a variety of broadband content, including videos, movies, music, photos, and games. AQUOS NET APPS I Please check that the most current software is loaded on TV by selecting "Auto Update Setting" on "Software Update" (see page 37) or by visiting http://www.sharpusa.com/products/support/ to check for a download of the newest software version. AQUOS NET APPS 1 Press MENU to display the menu screen.
Usingthe Internet When you access the Internet application for the first time, the following appears. o This messageis availableonly in English. DISCLAIMERS This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties.
Appendix • Before detaching Do not remove Before (or attaching) the stand, unplug the AC cord. the stand from the TV unless attaching/detaching • Before performing work, using an optional wall mount to mount make sure to turn off the TV. 1 Unfasten bracket the stand 2 the four screws used to secure the stand in Detach the stand from the TV. place. • To attach the stand, perform the above steps in reverse order.
Appendix This TV should be mounted on the wall only with the wail mount bracket AN-52AG4 (SHARP}. The use of other wail mount brackets may result in an unstabJe instaJlation and may cause serious injuries. = InstalJing the TV requires special skirl that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Appendix Problem o No power o Check if you pressed POWER on the remote control unit. _, Page 17 o Is the AC cord disconnected? ,,_Page 8 o Has the power been turned on? • Page 17 o Unit cannot be operated, o External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes. o Remote control unit does not operate.
Appendix Problem Possible Solution o No picture o Is connection to other components correct? =_ Pages 12 to 16 and 51 Is the correct input selected? =_ Pages 12 and 21 o Is "On" selected in "Audio Only"? • Page 29 If the PC image is not displayed, check the following: - When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor. - Check the resolution setting on the PC.
Appendix CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 2 Select an item from the list below to display the secret number input screen. (For operating the on-screen display menu, see page 24.) • "Color system" (_ "Input Terminal Setting" _ System Options menu). "EZ Setup" or "Reset" (_ Initial Setup menu). "CH Setup" (_ "Broadcasting Setup" _ Initial Setup menu). "Parental CTRL" (_ "Individual Setup" _ Initial Setup menu).
Specifications Itern Model: LC-70LE732U/LC-70LE632U LCD Size 70" Class (69 _/2"Diagonal) panel Resolution 2,073,600 pixels (1,920 x 1,080) TV-standard (CCIR) TV Function Receiving Channel 60" Class (60 _/s2"Diagonal) American TV Standard ATSC/NTSC System VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled Digital Terrestrial Broadcast (8VSB) 2-69ch Digital cable n (64/256 QAM) 1-135ch (non-scrambled Audio multi olex channel only) channel only) BTSC System Audio out 10 W x
Specifications = = .'t, FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
information on the Software License for This Product Software composition The software included in this product is comprised of various software components whose individualcopyrights are held by SHARP or by third parties.
information on the Software License for This Product m Software Copyrights XMLRPC-EPI Copyright 2000 © Epinions, Inc. libjpeg This software is copyright © 1991-1998, Thomas G. Lane. Portions of this software are based in part on the work of the Independent JPEG Group. OpenSSL Copyright © 1998-2008 The OpenSSL Project. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org) SSLeay Copyright © 1995-1998 Eric Young (eay@cryptsoft.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
SH R| LiMiTED Consumer WARRANTY Electronics Congratulations Products on your purchase! Sharp Electronics of Canada Ltd.
Dimensional Drawings LC-70LE732U/LC-70LE632U 831/2/1813t _ 2,/_,(51),, _ 31/2/89/ Unit: inch (mm) Unite: pouce (mm) Unidad: pulgada (mm) / I 60 19/32 (1538.88) '1 i i, , 5 2s/64 (136) _ i ± L 21 7/64 (536) 15 3/ 5 25/64 (137) =.! AN-52AG4 LC-60LE632U 1 3/64 (26.4) '2 54 29/64 (1383) i -_ 52 11/32 (1329.12) '1 ÷ L 217/64(536) J 5° , \ i \ I ! \ \ \ It. \ i 41/2 I I AN-52AG4 Active area/A,rea activa/Zone active 2 Thinnest part/Parle mb.
SHARP SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprime au Mexique Impreso en Mexico TINS-F088WJN1 11P09-MX-NM
