Specifications

6
Preparation
Where to place the System
“System” means the Display and AVC System. First select the location where to place the System.
1
2
Selecting the location of the System
• Select a place with no direct sunlight and good ventilation.
• Select a place where it is flat and without a slope.
• The Display and the AVC System are connected by the system cable.
(See page 7 for details.)
Setting the System in place
Handling the Display
CAUTION
• When using the Display with the supplied stand attached, do not remove the speaker. Doing
so may disturb the balance leading to product damage or personal injury.
• Do not remove the stand and speaker from the Display unless using an optional bracket to mount
it.
• Keep enough space above and behind the Display.
• When you move the System, carry it by two or more people.
• When you move the Display, hold the portion of the Display, not the speaker.
Handling the AVC System
CAUTION
• Do not put a VCR or other device on the AVC System.
• Keep enough space above and on the sides of the AVC System.
• Do not block the ventilation openings on the top and left side, and the exhaust fan on the right
side.
• Do not spread a thick cloth beneath the AVC System, or cover it with one, as this can cause
overheating and result in malfunction.
System cable
Display AVC System
10 cm
or more
5 cm or more
5 cm or more
on both sides
Keep enough space
There is an exhaust fan
on the right side.
LC-65G5X(E)-a 05.10.17, 7:32 AM6