Specifications

47
Using external equipment
Connecting external speakers
Selecting speakers
You can output audio using the supplied speakers or
other external speakers.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Speaker Setup”, and
then press ENTER.
1
2
3
Press c/d to select “SPEAKER-A” or
“SPEAKER-B”, and then press ENTER.
5
Press a/b to select “Speaker”, and then
press ENTER.
4
Description
Speaker connected to the Display.
Speaker connected to the AVC System.
Selected item
SPEAKER-A
SPEAKER-B
External Audio Bypass
External Audio Bypass automatically optimises the
audio quality to suit internal (supplied) speakers.
Repeat steps 1 to 3 in Selecting speakers
above.
1
2
Press c/d to select “Yes” or “No”, and then
press ENTER.
3
Press a/b to select “External Audio
Bypass”, and then press ENTER.
NOTE
• External Audio Bypass is greyed out when Dolby Virtual
is set to “On”.
• When using external speakers (SPEAKER-B), make sure
to set “External Audio Bypass” to “Yes”.
• When Dolby Virtual is on, External Audio Bypass
automatically sets to “Yes”.
Description
Sets the optimum audio for the internal
(supplied) speakers.
When you are using your own speakers,
output the original sound.
Selected item
No
Yes
Speaker Setup
CAUTION
• Press POWER to turn the power off before connecting/
disconnecting speaker cables.
Disconnect the speaker cables for the
supplied speaker from the speaker terminals.
Connect the speaker cables for external
speakers to the speaker terminals.
When using external speakers
• Change the speaker setting to “SPEAKER-B”.
Be sure to connect the speaker terminal and cable
polarity (L, +) properly
• The speaker terminal has plus (L) and minus (+) polarity.
• Plus is red and minus is black.
• The cables are also divided into plus and minus.
• When connecting the left/right speakers, be sure to
connect the plus/minus terminals with the correct cables.
CAUTION
• Make sure external speakers have 4 ohm and 10 watt
specifications.
• Connect the plus/minus terminals with the correct cables.
Incorrect connection may cause a short.
NOTE
• Unplug the AC cord from the AC outlet before installing
the speakers.
Rear view
1
2
How to connect the
speaker cable
Push down the tab.
Insert the end of the
cable.
11
11
1
22
22
2
33
33
3
Lift the tab back
up.
LC-65G5X(E)-g 05.10.17, 7:41 AM47