MODEL LC-46GD7X LC-52GD7X LCD COLOUR TELEVISION OPERATION MANUAL LC-GD7X_Cover1 1 06.9.
LC-46GD7X LC-52GD7X LCD COLOUR TELEVISION OPERATION MANUAL Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product.
Contents Basic adjustment settings (Digital) …………………… 32 DTV input mode menu items ………………………… 32 Selecting DTV mode ………………………………… 32 Programme Guide …………………………………… 33 Info ……………………………………………………… 33 Favourite Programme List …………………………… 33 Programme List ……………………………………… 34 Favourite & Lock ……………………………………… 34 Parental Rate …………………………………………… 34 Installation ……………………………………………… 35 Auto Search …………………………………………… 35 Manual Adjust ………………………………………… 35 Quick Search ………………………………………… 36 Reset Data ……………………………………………… 36 Vi
Important Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement. • Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock.
Supplied accessories Make sure the following accessories are provided with the product. Remote control unit “AAA” size battery (g2) AC cord Page 14 Page 5 Page 6 Cable clamp (g2) Cable clamp Operation manual Page 6 Page 6 Safety restraints Screws for brackets Restraining brackets Clamps Screws for clamps Page 8 NOTE • Always use the AC cord supplied with the TV.
Preparation Inserting the batteries Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover. 2 Insert two supplied “AAA” size batteries. 3 Close the battery cover. • Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.
Preparation Setting the TV Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. 1 Removing the terminal cover TV (rear view) Press down the hooks to remove the cover toward you. 2 Connecting the AC cord, antenna, and external equipment to the TV See pages 9 to 11 for connecting antennas and external equipment, such as VCR and DVD player.
Preparation Setting the TV on the wall • You can mount the TV on the wall, using the optional AN-37AG2/AN-52AG1 bracket. • For details, refer to the instructions supplied with the optional bracket. CAUTION • This TV should be mounted on the wall only with the AN-37AG2/AN-52AG1 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Preparation Protection against overturning There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-resistant measurement for your safety. View from the top Anchoring the TV to the wall or a pillar Cup hook (commercially available) 1 2 Fix the product with the 2 clamps (supplied), using the screws (supplied). Wall Tie (commercially available) Fix the TV to the wall using extra strong ties (commercially available).
Preparation Simple operations for watching a TV programme Basic connection Connecting to an antenna To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable.
Preparation You can connect many types of external equipment to your TV, like a VCR, DVD player, HDTV tuner, game console and camcorder. To view external source images, select the input source from TV/VIDEO on the remote control unit or TV/VIDEO on the TV. CAUTION • To protect all equipment, always turn off the TV before connecting to a VCR, DVD player, HDTV tuner, game console, camcorder or other external equipment. • Please refer to the relevant operation manual (VCR, DVD player, etc.
Preparation Connecting a Digital TV STB (Set Top Box) You can use the INPUT 1/INPUT 2 (component) or INPUT 4/INPUT 5 (HDMI) terminal when connecting to a Digital TV STB and other audiovisual equipment. NOTE • When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 5. • When using component cable, select “COMPONENT” for “Input Select” in the menu. When using HDMI cable (commercially available). When using component cable (commercially available).
Part names TV (Front) Channel up (r)/down (s) buttons Volume up (+)/down (–) buttons Remote control sensor OPC sensor POWER indicator TV/VIDEO button POWER (On/Off) button Headphone jack OPC indicator* SLEEP timer indicator *OPC: Optical Picture Control (See page 26.) Regarding the headphone jack • Use headphones with a stereo mini plug (Ø 3.5 mm). • Be sure to unplug headphones from the jack when they are not in use. • The speakers do not output volume when headphones are plugged in.
Part names TV (Rear) AC INPUT terminal INPUT 4 (HDMI) terminal INPUT 5 (HDMI) terminal SERVICE ONLY terminal* DIGITAL AUDIO OUTPUT terminal (To optical digital input of external audio devices) INPUT 6 terminals INPUT 5 (AUDIO) terminals INPUT 1 terminals INPUT 2 terminals INPUT 3 terminals MONITOR OUT terminals Antenna input terminal (DTV) RS-232C terminal Antenna input terminal (ANALOGUE) *Usually do not connect anything to this terminal as it is reserved only for service personnel.
Part names Remote control unit 5 6 7 8 1 14 9 10 11 2 12 13 3 15 4 16 5 6 17 7 8 9 18 19 20 21 22 10 23 14 15 24 11 16 25 26 12 13 27 17 18 19 20 21 22 NOTE • When using the remote control unit, point it at the TV. 1 2 3 4 POWER (STANDBY/ON) To switch the power on and off. (See page 15.) 0–9 TV/DTV/External input mode: Set the channel. (See page 15.) TELETEXT mode: Set the page. (See pages 15, 52 and 53.
Watching TV Simple button operations for changing channels Turning on the power Press POWER on the TV. • POWER indicator (Green): The TV is on. (After a few seconds, an image appears with sound.) • After turning the power “ON” by pressing POWER on the TV, you can turn the power ON/OFF by pressing POWER on the remote control. You can change channels in several ways. Using CHr/son the remote control unit • Press CHr to increase the channel number. • Press CHs to decrease the channel number.
Watching TV Using Flashback (A) on the remote control unit When receiving a monaural signal Each time you press MPX, the mode switches between NICAM MONO and MONO. Monaural mode NICAM BBC2 BBC2 99 99 PAL B/G MONO PAL B/G MONO In the TV mode of A2 TV broadcasts Press A to switch the currently tuned channel to the previously tuned channel. Press A again to switch back to the currently tuned channel. When receiving a stereo signal Each time you press MPX, the mode switches between STEREO and MONO.
Watching TV Simple button operation for changing volume/sound NOTE • Within 30 minutes after pressing e, press one of the buttons below to cancel the mute. e —VOLf f /VOLe —e • Mute will be cancelled after 30 minutes. However, the TV will not suddenly output loud sound as the volume level will be set to 0 automatically. Increase the volume level by pressing VOLk. 2 Press e again within 30 minutes to cancel the mute. • Before 30 minutes, the volume level returns to the previous setting.
Watching TV ANALOG/DTV/RADIO buttons Use the following buttons on the remote control to operate the menu. When you watch the TV for the first time When the TV powers on for the first time after purchase, perform the auto installation. Analogue TV You can run the auto installation to set channels automatically. 1 2 To watch the analogue TV, select “Auto Installation” from Setup menu. (See page 21.) After setting the channels, you can select a channel using CH r/s or 0-9 on the remote control unit.
Basic adjustment settings Menu operation buttons On-Screen Display Use the following buttons on the remote control to operate the menu. (Example) MENU [Option ... Input Select] Option Audio Only 1 DNR Input Select Colour System [VIDEO] [Auto] 2 3 4 1 Item displayed in yellow • This indicates the item currently selected. • Press ENTER to go to the adjustment screen for this item. 2 Item in brackets • This indicates the current setting for the item.
Basic adjustment settings Menu items (TV/DTV/INPUT1-3) Menu items (HDMI/DVI) List of menu items to help you with operations List of menu items to help you with operations Picture OPC ................................................ Page 26 Backlight ........................................ Page 27 Contrast ......................................... Page 27 Brightness ..................................... Page 27 Colour ............................................ Page 27 Tint ............................
Basic adjustment settings (Analogue) Auto installation Programme setup You can run auto installation again, even after setting up the preset channels. You can run the auto search procedure again at any time by accessing the Setup menu and Programme Setup. Channels can be tuned automatically or manually. Auto search You can also automatically search by performing the procedure below. This is the same function as programme auto search in auto installation. 1 Press MENU and the MENU screen displays.
Basic adjustment settings (Analogue) Manual setting for each channel You can set some channel items manually. They are Search, Fine (TV frequency), Colour sys., Sound sys., Label (Network name), Skip and Lock (Child Lock). 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. Search tuning 1 Press a/b/c/d to select the channel you want to edit, and then press ENTER. • The selected channel information displays. 2 Press a/b to select “Search”, and then press ENTER. [Setup ...
Basic adjustment settings (Analogue) Manual setting for each channel (continued) Colour system 1 Press a/b/c/d to select the channel you want to edit, and then press ENTER. • The selected channel information displays. 2 Press a/b to select “Colour sys.”, and then press ENTER. • Receivable colour systems are listed. Labelling channels When a TV channel sends its Network Name, the auto installation detects the information and assigns a name to it. However, you can change individual channel names.
Basic adjustment settings (Analogue) Manual setting for each channel (continued) Channel positions can be sorted freely. Skipping channels Channels with “Skip” set to “On” are passed over when using CHr/s even if selected while watching the image from the TV. 1 Press a/b/c/d to select the channel you want to edit, and then press ENTER. • The selected channel information will be displayed. 2 Sort 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”.
Basic adjustment settings (Analogue) Erase Programme The individual programme can be erased. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Programme Setup”, and then press ENTER. If you already set the password, enter it here. • See page 39 for setting a password. 4 Press a/b to select “Erase Programme”, and then press ENTER. 5 Press c/d to select “Yes”, and then press ENTER.
Basic adjustment settings (Analogue/Digital) NOTE AV MODE selection AV MODE gives you 7 viewing options to choose from to best match the system environment, which can vary due to factors like room-brightness, type of programme watched or the type of image input from external equipment. Using AV MODE on the remote control unit 1 Press AV MODE. • Present AV MODE displays. 2 • You can select a different AV MODE item for each input mode.
Basic adjustment settings (Analogue/Digital) Picture adjustments Adjustments items You can adjust the picture to your preference. MENU Follow the steps to adjust the picture. [Picture] Picture Audio STANDARD OPC On On: Display [+14] –16 +16 Contrast [+30] 0 +40 Brightness [0] –30 +30 Colour [0] –30 +30 Tint [0] –30 +30 Sharpness [0] –10 +10 Advanced 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Picture”.
Basic adjustment settings (Analogue/Digital) Advanced Quick Shoot Advanced setting enables you to set the picture adjustment in more detail. There are seven options you can choose from. Use Quick Shoot to view fast-action video more clearly. 1 Repeat steps 1 to 3 in Colour temperature. 2 Press a/b to select “Quick Shoot”, and then press ENTER. 3 Press c/d to select “Advanced”, and then press ENTER. Colour temperature Adjusts the colour temperature to give the best white image.
Basic adjustment settings (Analogue/Digital) Monochrome Range of OPC For viewing a video in monochrome. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Picture”. 3 Press a/b to select “Advanced”, and then press ENTER. 4 5 Press a/b to select “Monochrome”, and then press ENTER. Press c/d to select “On”, and then press ENTER. The brightness level range of the OPC sensor’s automatic adjustments can be set according to your preferences.
Basic adjustment settings (Analogue/Digital) Audio adjustment Surround You can adjust the sound quality to your preference with the following settings. When you set to “On”, you can enjoy surround sound, the same as if you were in a movie theatre. Using SURROUND on the remote control unit 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Audio”.
Basic adjustment settings (Analogue/Digital) Power Control Power control setting allows you to save energy. No Signal Off When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Power Control”. 3 Press a/b to select “No Signal Off”, and then press ENTER. 4 Press c/d to select “Enable”, and then press ENTER • Power control menu displays.
Basic adjustment settings (Digital) DTV input mode menu items List of DTV menu items to help you with operations Programme Programme List ....................................................................................................... Page 34 Favourite & Lock ........................................................... Page 34 Edit Channel Parental Rate ................................................................. Page 34 Setup Installation Auto Search ........................................
Basic adjustment settings (Digital) Programme Guide Favourite Programme List You can check the schedule of DTV events and view detailed information about current or future events. 1 Press GUIDE to display the programme guide list. 2 Press a/b to display your desired programme, and then press ENTER. When you are watching terrestrial TV channels, you can call up the Favourite Programme List using FAV. on the remote control. • When you press ENTER, the TV jumps to the channel.
Basic adjustment settings (Digital) Programme List 6 You can select the desired programme from the programme list. Press c/d to select “Lock” or “Fav”, and then press ENTER. Selected item 1 Press DTV MENU to display the DTV menu screen. 2 Press a/b to select “Programme”, and then press ENTER. 3 Press a/b to select “Programme List”, and then press ENTER. Description When the channel is locked, you must enter your Password whenever you tune to the channel.
Basic adjustment settings (Digital) Installation Manual Adjust The first time the receiver is powered on, “Database is empty” or “No Channel Available” will display on the screen. Under the main menu, select “Installation” and enter into the sub-menu. Auto Search You can automatically search for and download TV channels. 1 Press DTV MENU to display the DTV menu screen. 2 Press a/b to select “Setup”, and then press ENTER. You can set some channel items manually.
Basic adjustment settings (Digital) Quick Search Video Setup If you live in the cities or regions listed in the “Quick Search” menu, you can scan all DTV channel signals. 1 Press DTV MENU to display the DTV menu screen. 2 Press a/b to select “Setup”, and then press ENTER. 3 Press a/b to select “Installation”, and then press ENTER. If you have already set the password, enter it here. If not, enter the factory preset password “1234”. This function allows you to select an output format.
Basic adjustment settings (Digital) Digital Output Multilingual This function allows you to select your favourite audio output system. You can select a different audio language when the broadcast has different audio language. 1 Press DTV MENU to display the DTV menu screen. 1 Repeat steps 1 to 4 in Digital Output. 2 Press a/b to select “Setup”, and then press ENTER. 2 Press a/b to select “Multilingual”, and then press ENTER. 3 Press a/b to select “System Setup”, and then press ENTER.
Basic adjustment settings (Digital) I-Plate Setup (Information Plate Setup) This function allows you to configure the display time and time format for the information plate. 1 Press a/b to select “Setup”, and then press ENTER. 3 Press a/b to select “System Setup”, and then press ENTER. 5 You can check the current version of the hardware and software on the screen. 1 Press DTV MENU to display the DTV menu screen. 2 Press a/b to select “Option”, and then press ENTER.
Useful adjustment settings Password setting for child lock (for TV/DTV input mode) Allows you to use a password to protect certain settings from being accidentally changed. Resetting the password Allows you to reset your password. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Child Lock”, and then press ENTER. 4 Enter the password. Setting a password Register a 4-digit password number to use the Child Lock function.
Useful adjustment settings Speaker Setup External Audio Bypass Connecting external speakers 1 Press POWER on the top TV panel to turn it off. 2 Connect external speakers to the TV. Rear view External Audio Bypass automatically optimises the audio quality to suit internal (supplied) speakers. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Speaker Setup”, and then press ENTER.
Useful adjustment settings Input Signal (PC input mode only) Input Skip This setting allows you to skip the HDMI or DVI input on the “Input Select” menu. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Input Skip”, and then press ENTER. 4 • Some input signals may have to be registered manually to display properly. • The pairs of input signals (resolutions) in the list below are not distinguishable when received.
Useful adjustment settings Auto Sync. adjustment (PC input mode only) For automatically adjusting the PC image. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 4 Fine Sync. adjustment (PC input mode only) Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image. 1 Press MENU and the MENU screen displays. Press a/b to select “Auto Sync.
Useful adjustment settings Image position Input Label You can assign each input source a label you like. 1 2 3 4 5 Press TV/VIDEO to select the desired input source. Press MENU and the MENU screen displays. For adjusting a picture’s horizontal and vertical position. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Position”, and then press ENTER. 4 Press a/b to select “H-Pos.” or “V-Pos.”. [0] –10 +10 V-Pos.
Useful adjustment settings Wide Screen Signalling (WSS) WSS allows a television to switch automatically among the different screen formats. Picture aspect ratio The WSS signal has 4:3 auto-switching that allows you to select between Panorama and Normal. 1 Press MENU and the MENU screen displays. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 2 Press c/d to select “Setup”. 3 Press a/b to select “WSS”, and then press ENTER.
Useful adjustment settings Standby Mode Reset Standby Mode may be set to either start the TV quickly from standby or conserve energy while on standby. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Standby Mode”, and then press ENTER. 4 Press a/b to select “Mode1” or “Mode2”, and then press ENTER. Selected item Description Mode1 Starting the TV is quick from standby. Mode2 Power consumption is small during standby.
Useful adjustment settings WIDE mode (for TV/AV input mode) Manual Selection 1 Press WIDE. • The WIDE MODE menu displays. • The menu lists the wide mode options selectable for the type of video signal currently received. 2 WIDE MODE Press WIDE or a/b while the WIDE MODE menu displays on the screen. Normal Zoom 14:9 • As you toggle down the options, each is immediately reflected on the TV.
Useful adjustment settings WIDE mode (for PC input mode) You can select the screen size. NOTE • Connect the PC before making adjustments. • Selectable screen size may vary with input signal type. 1 Press WIDE. • The WIDE MODE menu displays. WIDE MODE Normal Cinema Full Dot by Dot (Example) 2 Press WIDE or a/b to select a desired item on the menu. a Screen size images. Input Signal Normal 1024g768 Keeps the original aspect ratio in a full screen display. Cinema For viewing widescreen programs.
Useful adjustment settings Audio Only HDMI Setup When listening to music from a music programme, you can set the display off and enjoy audio only. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 4 Press a/b to select “Audio Only”, and then press ENTER. Press c/d to select “On”, and then press ENTER. HDMI (High-Definition Multimedia Interface) terminal selection.
Useful adjustment settings Language setting for on-screen display You can also select a language from setup menu. Select from among 3 languages: English, Chinese and Arabic. 1 2 3 4 Colour system setting You can change the colour system to one that is compatible with the image on the screen. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Press a/b to select “Colour System”, and then press ENTER.
Using external equipment Displaying an external equipment image Explanation here is for the setting when connecting DVD to INPUT1 terminal. Input Select Selecting input source Can use for selecting the input source. 1 Press TV/VIDEO on the remote control unit or TV/VIDEO on the TV. 2 Press TV/VIDEO on the remote control unit or TV/VIDEO on the TV to select the input source. • An image from the selected source automatically displays. • You can also select the input source by pressing a/b.
Useful features Freezing images Allows you to capture and freeze one frame from a moving image that you are watching. 1 Press FREEZE. Teletext language setting If Teletext information does not display correctly, perform the setting procedure below. Select from among 4 kinds of language tables: West Europe, East Europe, Greek/Turkish, Cyrillic. Each table is compatible with the Teletext languages listed below. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”.
Useful features Teletext function What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather reports, sports information, stock exchange prices and programme previews are among the many services available. TELETEXT Teletext mode Teletext is turned on/off with m on the remote control unit.
Useful features Displaying Subtitle Displaying Subpages You can display several subtitles as they are transmitted. You can display several subpages as they are transmitted. 1 Press [ to display the subtitle. • Subtitle is updated by information sent by the broadcasting station. • To stop updating subtitle automatically, press 3. 2 Press [ to exit the subtitle screen. 1 Press m to display Teletext. 2 Press 1 to display the subpage as shown below.
Appendix Troubleshooting Problem Possible Solution • No power. • Check if you pressed POWER on the remote control unit. (See page 15.) If the indicator on the TV lights up red, press POWER. • Is the AC cord disconnected? (See page 6.) • Has the power been turned on? (See page 15.) • Unit cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation.
Appendix RS-232C port specifications PC Control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-sub RS-232C for the connections.
Appendix Response code format Normal response O Problem response (communication error or incorrect command) K E R R Return code (0DH) Return code (0DH) Commands • Commands not indicated here are not guaranteed to operate.
Appendix Specifications Model LC-46GD7X Item LC-52GD7X LCD panel 46o (117 cm) Advanced Super View & BLACK TFT LCD Number of dots 6,220,880 dots (1920 g 1080 g 3 dots) Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV Function 52o (132 cm) Advanced Super View & BLACK TFT LCD TV-Standard Analogue PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M Receiving Channel Digital DVB-T VHF/UHF 44.25-863.
Appendix Removing the speakers The unit’s speakers can be attached and removed. Before attaching/detaching the speakers • Before detaching (or attaching) the speakers, unplug the AC cord from the AC outlet. • Remove all terminal covers and connected cables. • Make sure two or more people perform the operation when detaching (or attaching) the speakers. 1 Remove the two speaker terminal covers. 2 Unplug the speaker cables from the speaker terminals.
Dimensional drawings LC-46GD7X, LC-52GD7X Unit: mm NOTE • Figures within parentheses are for LC-52GD7X.
CLEARING THE PASSWORD If you forget the password, clear the password using the following procedure. 1 Press MENU to display the MENU screen, and then press c/d to select “Setup”. 2 Press a/b to select “Auto Installation”, “Programme Setup”, “Child Lock”, and the password input screen displays. – – – – 3 Press and hold both CHr and VOLk on the TV simultaneously until the message appears on the screen. • The password resets to the factory preset “1234”. The Password is .
FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.au OR CALL SHARP CUSTOMER CARE 1300 135 022 (LOCAL CALL COST APPLY WITHIN AUSTRALIA) SHARP CORPORATION OF AUSTRALIA PTY LTD FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.
This Sharp product is warranted against faults in materials and manufacture for a period of twelve (12) months from the date of original purchase. If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein. The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
