Quick start Guide

STEP3.Establishanetworkconnection

1.Press

the

button

on the remote control

and then

press

to enter the Settings menu

2.Select

Network

→

NetworkConguration

TV JACK

Modem Cable LAN CableLAN Cable

External Modem

(ADSL / VDSL / Cable TV)

IP Sharer (Router)

(with DHCP server)

LAN

Establishawirednetworkconnection

AutomaticallyobtainanIPaddress

1.Select

Ethernet

. The TV will automatically obtain an IP address and connect to the network.

NOTE:ThedefaultoptionofIPSettingModeisDHCP.

2.If the connection fails then "

Disconnected

" will display for the Ethernet status. Retry or select

Manual

to input the information again.

ManuallyentertheIPaddress

1.Select

Manual

2.Enter the IP Address, Subnet Mask, Default Gateway, Preferred DNS and Alternative DNS in the menu. Next, select

Connect