Manual

On-Screen Display Menu
®
I the rem_r will char/ge in I
acc_'/u setting screen. J
Press _11/1_to select the desired item.
Press A/T to select the desired item.
Press _11/i_ to adjust the item.
Example
I _ Option
®
(_ Item displayed in yellow
,, This indicates the item currently selected.
Press ENTER to go to the adjustment screen for this
item.
(_) Item in brackets
• This indicates the current setting for the item.
Item displayed in white
This indicates that the iterrl can be selected.
@Item displayed in gray
,, This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
--Nothing is connected to the selected input terminal.
--The function is not compatible with the current input
signal.
,, Menu options differ in the selected input modes, but the
operating procedures are the same.
,, The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
111=,
Using the remote control
Use the following buttons on the remote control to
operate the menu.
MENU:
ENTER:
RETURN:
Press to open or (:lose the rrlenu screen.
Press to select a desired item on the screen or
adjust a selected item.
Press to go to the next step or complete the
setting.
Press to return to the previous step.
Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
........ MENU: MENU on the remote
0 control.
MEnu
O INPUT: ENTER on the remote
@ control.
cH
I CH/\/V: CursOr A-/_" On the
remote control.
VOL+/-: Cursor _1/1_ on the
remote control.
Q- 21