Flat Panel Television User Manual

44
Useful adjustment settings
Standby Mode
Standby Mode may be set to either start the TV quickly
from standby or conserve energy while on standby.
Press
a
/
b
to select “Standby Mode”, and
then press ENTER.
3
Press
a
/
b
to select “Mode1” or “Mode2”,
and then press ENTER.
4
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Selected item
Mode1
Mode2
Description
Starting the TV is quick from standby.
Power consumption is small during
standby.
Press MENU to exit.
5
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press
a
/
b
to select “Reset”, and then press
ENTER.
• “Return to factory pre-settings” displays on the
screen.
3
Press
c
/
d
to select “Yes”, and then press
ENTER.
• “Now, TV will restart automatically. OK?” displays
on the screen.
4
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Setup”.
2
Press
c
/
d
to select “Yes”, and then press
ENTER.
• “Now initialising...” displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
5
NOTE
• The AV MODE will be set to “DYNAMIC”.
• The Programme Setup settings will not be changed.
• The Language settings will not be changed.
Now initialising...
46PD7X_en_g.indd 4446PD7X_en_g.indd 44 2007/01/12 16:33:092007/01/12 16:33:09