Manual

On=Screen Display Menu
Adjusts the picture to your preference with the
following picture settings.
Example
CC AVMODE VIEWMODEFLASHBACK
_ _K22_
AQUOS
NET DOCK
FAVORITESURROUNDAUDIO FREEZE
_000
A B C D
0000
The audio and video settings can be changed to suit
the program or input content being watched.
Select from the following AV modes.
When the input source is TV, INPUT 1 or 2
terrninals:
AUTO/STANDARD/MOVIE/GAME/USER/DYNAMIC/
DYNAMIC(Fixed)
m When the input source is INPUT 3, 4, 5, 6 or 7
terminals:
AUTO/STANDARD/MOVIE/GAME/PO/USER/x.v.Oolor/
DYNAMIC/DYNAMIC(Fixed)
The selectable items vary depending on the input source.
You can select AV MODE by pressing AV MODE on the
remote control unit. See page 19 for details of AV MODE
settings.
Automatically adjusts the brightness of the screen.
Off: The brightness is fixed at the value set in "Backlight".
On: Automatically adjusts.
On: Display: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
1 Press MENU to display the MENU screen, and then
press 4/_ to select "Picture Settings".
2 Press A/T to select a specific adjustment item.
o Select "Advanced" and then press ENTER to set
"C. MS.-Hue", "C. MS.-Saturation", "C. M.S.-Value",
"Color Temp.", "Motion Enhancement", "Active
Contrast", "Gamma Adjustment", "Black Level",
"Film Mode", "Digital Noise Reduction", "3D-Y/C",
"Monochrome" or "Range of OPC".
3 Press A/T(or _I/P-) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Backlight The screen dims
Contrast For less contrast
Brightness For less
brig htness
Color For less color
intensity
Tint Skin tones
become reddish
Sharpness For less
sharpness
For resetting all Picture adjustment items to the factory
preset values, press h,/T to select "Reset", press ENTER,
press h,/T to select "Yes", and then press ENTER.
i@i_ii_ii_ii_ii_iiii!ii!ii!iiiiiii_ili:i_ii!i!i_!!_i_!i__¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_¸I_
The screen
brightens
For more contrast
For more
brightness
For more color
intensity
Skin tones
become greenish
For more
sharpness
= When set to "On", the Optical Picture Control (OPC)
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure nothing obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
= When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
(-OPC: _(_7_ 0 _ }
This TV provides various advanced functions for
optimizing the picture quality.
©olor tone is managed using the six-color adjustment
setting.
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S.-Saturation: Increases or decreases the
saturation of a selected color.
C.M.S.-Value: A higher value makes the image brighter.
A lower value makes the image darker.
= For resetting all adjustment items to the factory preset
values, press h,/T to select "Reset", and then press
ENTER.
Q- 24