Manual

On-Screen Display Menu
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
o When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
o "Disable" is the factory preset value.
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
"I_ Location: Select "Home" or "Store" for the location
where you plan to install the TV. This product qualifies
for ENERGY STAR in Home mode default setting.
Home: "Power Saving"is setto "Advanced", andAV MODE is
set to "STANDARD".
Store: "Power Saving"is setto "Off"andAV MODE isset to
"DYNAMIC(Fixed)".PictureReset andFeatureDemo can be
set.
Picture Reset:AV MODE will beset to "DYNAMIC(Fixed)"
regardlessofwhether PictureReset is "On"or "Off". Ifyou
select "On", AV MODEwill be resetto"DYNAMIC(Fixed)"
if thereis no operationfor 30 minutes.When "Off" is
selected, AV MODEwill be setto "DYNAMIC(Fixed)".
Feature Demo: When"On" isselected, after allthe settings
arecompleted, the FeatureDemo screen isdisplayed if
thereis no operationfor severalminutes.
ENERGYSTARqualificationisbased onAV MODE
"STANDARD".
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
OH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
o See Initial Installation on page 12 for setting each item.
o If no channel is found, confirm the type of connection made
with your TV and try "E7 Setup" again.
o If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the "Antenna Setup-
DIGITAL" screen. If necessary, adjust the direction of
the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel
is displayed. The signal information is based on the
current channel.
Channel Strength: Input the 2-digit channel number
to check the signal strength of the selected channel.
Make sure the signal is strong enough for each
channel.
= This function isavailablefor DIGITAL(Air)only.
If Initial Installation does not memorize all the channels
in your region, follow the instructions below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
OH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
OH Memory: You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
on: Skips channels.(Channelselectiondisabledusing OR
A/V.)
Off: Doesnot skip channels.(Channel selectionenabledusing
CRA/V.)
Remove Scrambled OH: This function makes the TV
look for and then delete digital cable channels that
are scrambled and so unavailable in the set area. The
process may take more than 20 minutes.
Yes:Starts to removescrambled channels.
No: Thisfunction does not work.
o See Initial Installation on page 12 for setting each item.
o If no channel is found, confirm the type of connection made
with your TV and try channel search again.
o If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
This setting allows you to skip the HDMI or PCqN Input
("Input 4 (PC)", "Input 5 (HDMI)", "input 6 (HDMI)" and
"Input 7 (HDMI)") on the Input Selection operation.
Yes: Skips the input.
Ne: Does not skip input.
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
Press A/V/41/I_ to select the new name for the input
mode.
Using the software keyboard, you can enter up to 1 0
characters for text.
Caps Off/Caps On/Caps Lock
If "alphabet" is selected in "Character Set", this
switches characters between uppercase and
lowercase.
Each time you press I=NTER, the character type
switches as shown below:
Caps Off: All the charactersare Iowetcased.
Caps On: Onlythe first character isuppercased.
Caps lock: Allthe characters are uppetcased.
o You cannot change labels ifthe INPUT SOURCE isTV.
20