Manual

Watching TV
Press POWER on the TV or on the remote control unit to turn the
power on.
o POWER indicator (Green): TheTV is on.
o The Initial Installation starts when the TV powers on for the first time. If the
TV has been turned on betore, the Initial Installation will not be invoked. For
changing the settings of the Initial Installation, pertorm "E,7 setup" on the Setup
menu on page 20.
Press POWER on the TV or on the remote control unit again to turn the
power off.
o The TV enters standby and the image on the screen disappears.
o The POWER indicator on the TV turns of/.
POWER
(On/Standby)
o If you are not going to use this TV for a long period of time, be sure to remove
O O O I _ theAC cord from theAC outlet.
o Weak electric power is still consumed even when the TV is tamed of/.
When you turn on the TV for the first time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press POWER on the
remote control unit.
1. Insert the batterbs into the remote control unit. (See page 9.)
2. Connect the antenna cable to the TV. (See page 9.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
Language (Language setting)
Sebet trom among 3 languages: English, French and Spanish.
1 Press A/Y to select the desired language listed on
the screen, and then press ENTER.
o ENERGY STAR qualification is based on AV MODE
"STANDARD".
Air/Cable (Antenna setting}
Make sure what kind ot connection is made with your TV
when selecting "Air" or "Cable".
3 Press _/1_ to select "Air" or "(},able".
Press ENTER to enter the setting.
CH Search (Channei search}
Channel auto search makes the TV look for all channels
viewable in the set area.
4 When "Air" is selected in Antenna setting:
Press _/1_ to select "Start", and then press ENTER.
TV Location
Select "Home" or "Store" tot the location where you plan to
install the TV. This product qualifies tot ENERGY STAR in
Home mode detault setting.
2 Press ".9/I_ to select "Home" or "Store".
Press ENTER to enter the setting.
When "CabLe" is selected in Antenna setting:
Press A/_' to select "Analog & Digital Seareh Start"
to search both analog and digital broadcasts, or to
select "Analog Search Start" to search only analog
broadcasts, and then press ENTER.
Home: "Power Saving" is set to "Advanced", and AV
MODE is set to "STANDARD".
Store: "Power Saving" is set to "Of/" and AV MODE is set to
"DYNAMIC (Fixed)". Picture Reset and Feature Demo can
be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Oft". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if
there is no operation for 30 minutes. When "Off" is selected,
AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When "On" is selected, after all the settings are
corrlpleted, the Feature Demo screen is displayed if there is
no operation for several minutes.
o The Channel search will start automatically.
o To exit the Channel search screen, select "Cancel", and
then press ENTER.
o If no channel is found, confirm the type ot connection made
with your TV and try "E,7 Setup" again.
(See page 20.)
o For changing the settings of the Initial Installation, pertorm
"E,7 setup" on the Setup menu on page 20.
12