Operation Manual

HDD Digital Recorder operation
Recording with the HDD
Time shift recording and archive recording
There are 2 ways of recording a TV programme with
the HDD. One is Time shift recording and the other is
Archive recording.
E
Time shift recording
The TV automatically records the programme currently
tuned in. Pause, rewind, and chasing playback is
available with the live programmes just like recorded
programmes. Every time you change the channel, the
old recording data of the previous channel is discarded
and the new recording starts.
• While this is working, the indicator lights green.
• If you choose not to use this feature, set “DR continuous
operation” to “off”.
• The maximum time shift duration is approximately 3 hours,
depending on the conditions.
E
Archive recording
You can record programmes onto the DR archive’s
hard disk drive.
About Delete Manager
The Delete Manager always makes sure there is
enough memory space on the hard disk for new
recordings. When the capacity of the hard disk is
almost exhausted, the old recordings are deleted.
Recordings which you have marked with delete
protection are not deleted by the Delete Manager.
You can delete these recordings manually.
For settings and cancelling delete protection, see
page 50.
To avoid loss of data, we recommend you copy
important recordings onto video tape or a writable
DVD, and delete the recordings from the Digital
Recorder after copying to save space.
SHARP is not liable for data loss on the Digital
Recorder’s hard disk.
Buttons for HDD operation
1 G Rewind
2 E Record
3 I Play
4 H Stop
5 J Fast forward
6 F Pause
7 Buttons inside the flip cover
The buttons inside the flip cover are for AQUOS
LINK operation and should not be confused
with HDD operation. (See page 19 for AQUOS
LINK operation.)
45
LC-52HD1E-gb.indd 45LC-52HD1E-gb.indd 45 2008/03/24 15:01:342008/03/24 15:01:34