Operation Manual

Connecting external devices
The TV’s integrated Connection wizard helps you connect new external devices and make cable changes. Before
actually connecting the external device, run the Connection wizard and register the equipment to be connected.
E
Before connecting ...
Carefully read the operation manual of each external device for possible connection types. This also helps you get
the best possible audiovisual quality to maximise the potential of the TV set and the connected device. Make a
note of the type of your connection before running the wizard.
Note on higher picture and sound quality
Higher quality is attained in ascending order. Refer to the manual of the device to be connected for the best
possible connection.
E
Video terminals Remarks
Higher Quality
Standard Quality
1 HDMI (EXT 5 or 6)
When using an HDMI/DVI
conversion cable, audio must be
fed in separately.
2 COMPONENT (EXT 3)
3 Euro SCART (EXT 1 or 2)
4 S-VIDEO (EXT 4)
Do not connect S-VIDEO and
VIDEO at the same time.
5 VIDEO (EXT 4)
E
Audio terminals
Digital audio connection Remarks
Higher Quality
Standard Quality
1 DIGITAL AUDIO IN/OUT
In this connection you must
specify the terminal to which the
audio is fed. (Page 35)
When using HDMI (EXT 5 or
6), the HDMI audio input takes
priority.
2 HDMI (EXT 5 or 6)
When using an HDMI/DVI
conversion cable, audio must be
fed in separately.
DOLBY DIGITAL signals are not
played back.
Analogue audio connection
Higher Quality
Standard Quality
1 AUDIO IN (L-R-CENTRE)
2 AUDIO IN (L/R)
14
LC-52HD1E-gb.indd 14LC-52HD1E-gb.indd 14 2008/03/24 15:00:492008/03/24 15:00:49