Manual

Other viewing options
You can view information about a program you are
currently watching,
RECORD _ M_U
C®S
Press INFO while watching a broadcast,
• Inrormation or the current program will be
displayed,
Sample program information
Update the still image by pressing ENTER,
• Each time you press ENTER, the image on the
right screen updates,
Press FREEZE to exit still image,
• This function does not work in INPUT 4 (HDMI) and INPUT
5 (BVIq).
• When this function is not available, "No displaying still
image available" will display.
• The still image is automatically erased after 30 minutes.
• Iryou are using freeze function and a broadcast activates
the V-CHIP BLOCK, freeze function will be cancelled and
a V-CHIP BLOCK message will appear.
• Ir the program you are receiving is copy-
protected, an icon will be displayed in the
program information. Recording digital
programs via i,LINK, or recording digital audio
via digital audio output terminals, is restricted.
Digital copying prohibited
One digital copy only
• Sometimes the name or the program is not broadcast. In
that case, the program name will not be displayed.
You can display two same-sized pictures - one moving
and one still,
I IIU
III
Press FREEZE,
• A moving image displays on the left screen and
a still image displays on the right screen. The
still image is one rrame captured from a moving
image at the moment you press FREEZE,
_EEZE
You can operate the connected AV products (AV
Receiver, Cable Box, SAT tuner, DTV,VCR, DVD, LD)
using the presetting manufacturer function for your
remote control unit,
r
TV TV VCR AUDIO
O o o o
C_USA_ DVD FUNC[ION
o o
SOURCE LIGHT
G90D GB
REC
(3D (3D OD
OOOO
Presetting manufacturer codes
Press FUNCTION until the LED for your
device lights up,
After the LED for your device lights up, if you
press FUNCTION and DISPLAY and enter
the code registration mode, the LED will
blink,
Press 0 - 9 to enter the manufacturer code,
(See page 76,)
• Preset mode is finished once the LED no longer
lights up.
After registering the code, the LED will stop
blinking then turn off after one second, (if
you perform an incorrect operation, the LED
will blink quickly then turn off,)
Q "75