Manual

QUICK REFERENCE
1
Remove the terminal cover as shown in the
illustration,
2
Insert the prqjecting bulges on the side of the
speakers into the corresponding slots in the display,
3
Fasten the screw,
Screw
4
Fasten the speaker cable with the holder,
Connect the ends of the cable to the speaker
terminals as shown in the illustration,
Connect leads to speaker terminals of the same color,
5
Attach the terminal cover as shown in the
illustration,
• Do not remove the stand and speaker from the TV unless using an optional bracket to mount it,
• Before performing work spread cushioning over the base area to lay the TV on, This will prevent it from being
damaged,
• Perform the same steps for right speaker.
• To remove the speakers, perrorm the steps in reverse order.
(_)-7