Manual

Useful adjustment settings
• Some input signals may have to be registered manually
to display properly.
• The pairs or input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
640x 400 720x 400
640x 480 848x 480
1024x768 1280x768
Press A/V to select "3D Noise Reduction",
and then press ENTER,
Press A/V to select the desired level, and
then press ENTER,
Low
• You can only select the "Input Signal" on the Setup menu
when receiving one orthe 6 input signals listed above.
RECORD _ M_U
O
-- FAVORITE CH --
Press MENU and the MENU screen displays,
Press _1/1_ to select "Setup",
Press A/V to select "Input Signal" and then
press ENTER,
Press A/V to select the desired input signal
on the display,
Example
Reduces fine detail mosquito noise,
Repeat steps 1 and 2 in 3D Noise
Reduction,
Press A/V to select "Mosquito Noise
Reduction", and then press ENTER,
When listening to music from a music program, you
can set the Liquid Crystal display off and eqjoy audio
only,
Repeat steps 1 and 2 in 3D Noise
Reduction,
Press A/V to select "Audio Only", and then
press ENTER,
Produces a clearer video image,
Press MENU and the MENU screen displays,
Press _1/1_ to select "On", and then press
ENTER,
On Audio is output without screen image,
Off Both screen images and audio are output.
Press _1/1_ to select "Option",
Q "65