Manual

Connecting to External Equipment
You can connect many types of external equipment to your TV. To view external source images, select the input
soume from INPUT on the remote control unit or on the TV. (See page 1 5.)
For connecting the TV to external equipment, use commercially available cables.
The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
• To protect equipment, always turn off the TV before connecting any external equipment.
• Please read the relevant operation meeual (Blu-ray disc player, etc.) carefully before making connections.
[] Connecting a Blu-ray Disc Player, DVD Player, Cable/Satellite Set-top Box, VCR, Game Console or Cameorder
Terminalon external
equipment
HD
HDml
DWOUT AUDIO
COMPON_N_
,® ®_
Auulo
® L®®_
VIDEO AUDIO
Standard
Quality
Cable Terminal on the TV
[[_}J:_-l_:_]===% HDMI-certified <)able
;_ ..... DVFHDMI conversion 4)able
e 3.5 mm stere<)minijack cable
Component vide<) cable
Audio cable
AV cable
INPUT 5, 6 or 7
AUDIO
INPUT 1 or 2
INPUT 1 or 3
AUDIO ®
¢,id
P_
®_®
d
®;
Audio
®
"1
*2
*3
*f Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
*2 When using a DVFHDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the INPUT 6 (HDMI) terminal, connect a ® 3.5 mm stereo minijack cable to the
AUDIO terminal and set "PC Audio Select" to "INPUT6 (HDMI)". (See page 21 .)
"3 To enjoy 1080p display capability, connect your external equipment using an HDMFcertified cable or a component cable
and set the equipment to f 080p output.
*4 The COMPONENT terminals take priority over the VIDEO terminal. (INPUT 1 only)
[] Connecting an Audio Amplifier
Terminalon external Cable Terminalon the TV
equipment
DIGITAL AUDIO "5
,, Optical fiber cable {° r_ OUTPUT
blGI1 A_ AUblO
OUTOUT
c® ®n Audiocable OUTPUT AUDIO_® *6
AUDIOINPUT _ ®
"5 Digital audio can only be output when receiving a digital broadcast.
*6 See page 24 for details on the Output Select function.
[] Connecting a PC
Terminal on PC
INPUT 4
ANALOGRGB
®
AUDIO
H_ml
DV_ OUT AUDIO
Cable
Anak)g RGB cable {D-sub 15-pin cable or VGA cable)
e 3.5 mm stereo minijack cable
E[_i[;_t_'_ HDMbcertified <)able
[i[]_- .... DVI-HDMI ......... i..... ble
e 8.5 mm stere<)minijack <)able
AUDIO
INPUT 5, 6 or 7
Terminalon the TV
ANA_ OG
RGB (PC IN)
AUDIO _)
AUDIO AUDIO I_)
*7 When connecting a PC to the INPUT 4, set "PC Audio Select" to "INPUT4 (PC)". (See page 21 .)
*8 Depending on the board, onlyvideo signals may be output. In this case, in addition to connecting an HDMI certified cable to the
INPUT 6 (HDMI) terminal, connect a e 3.5 mm stereo minijack cable to the AUDIO terminal and set "PC Audio Select" to "INPUT6
(HDMI)". (Seepage 21.)
The HDMI terminals only support digital signal.
o Refer to page 30 for a list of PC signals compatible with the TV.
11