Manual

On-Screen Display Menu
Adjusts the picture to your preference with the
following picture settings.
_i_d it_:_::::::
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less For more
brightness brightness
Color For less color For more color
intensity intensity
Tint Skin tones Skin tones
become reddish become greenish
Sharpness For less For more
sharpness sharpness
For resetting all Picture adjustment items to the tactory
preset vahJes, press A/T to select "Reset", press ENTER,
press A/T to select "Yes", and then press ENTER.
Automatically adjusts the brightness of the screen.
On(Display}: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
On: Automatically adjusts.
Off: The brightness is fixed at the value set in "Backlight".
o When set to "On", the Optical Picture Control (OPC) senses
the surrounding light and automatically adjusts the bacHight
brightness. Make sure nothing obstnJcts the OPC sensor,
which could affect its ability to sense surrounding light.
o When set to "On(Display)", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
o When set to "On" or "On(Display)", the OPC indicator on
the TV lights green.
This TV provides various advanced functions for
optimizing the picture quality.
Color tone is managed using the six-color adjustment
setting.
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S.-Saturation: increases or decreases the
saturation of a selected color.
C.M,S.-Value: A higher value makes the image brighter.
A lower value makes the image darker.
o For resetting all adjustment items to the factory preset
values, press _./T to select "Reset", and then press
ENTER.
For a better white balance, use color temperature
correction.
High: White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low: White with reddish tone
Automatically adjusts the image contrast according to
the scene.
On: Automatically adjusts the image contrast.
Off: No adjustment.
o_
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
On: Detects, analyzes, converts film soume.
Off: Normal viewing mode.
o "Film Mode" is not sebctabb when channel display shows
an input resolution of 480p, 720p or 1080p.
Produces a clearer video image.
Off: No adjustment
High/Middle/Low: Select a desired bvel for viewing a
clearer video image.
Provides high quality images with minimal dot crawl
and cross color noise.
Standard: Normal adjustment.
Fast: For moving images.
Slow: For still images.
Off: For Game Mode.
• "3D Y/C" is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
The brightness level range of the OPC sensoCs
automatic adjustments can be set according to your
preferences.
The adjustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of-16.
Max,: -15 through +16
Min.: 16through +15
e The maximum setting cannot be set to a smaller number
than the minimum setting.
o The minimum setting cannot be set to a bigger number
than the maximum setting.
o Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
18