Service manual

10
LC-37HV4U
LC-37HV4D
Using external equipment
Digital TV tuner
AVC System (rear view) AVC System (front view)
AV Receiver (Built-in Tuner Amp)
VCR
DVD player
Game console/ Camcorder
PC
You can connect many types of external equipment to your System, like a DVD player, VCR, Digital TV tuner, PC, game console and camcorder. To view external source images, select the input source from INPUT on the
remote control unit or on the Display.
CAUTION
• To protect all equipment, always turn off the AVC System before connecting to a DVD player, VCR, Digital TV tuner,
PC, game console, camcorder or other external equipment.
NOTE
• Please refer to the relevant operation manual (DVD player, PC, etc.) carefully before making connections.
S-VIDEO
S-VIDEO S-VIDEO
AV
S-VIDEO
AV
AV
AV
Y/P
B/PR
Y/PB/PR
PC-AUDIO
ANALOG RGB
AV
S-VIDEO
DVI
Rear view
Useful adjustment settings
Connecting external speakers
RED BLACKBLACK RED
When using external speakers • Change the speaker setting to external speakers. Make sure to connect the speaker jack and cable polarity (
, ) properly
• The speaker jacks have plus ( ) and minus ( ) polarity.
• Plus is red and minus is black. • The cables are also divided into plus and minus. • When connecting the left/right speakers, be sure to
connect the plus/minus jacks with the correct cables.
NOTE
• See page 11 for bundling the cables of the external
speakers.
• Unplug the AC cord from the AC outlet before installing
the speakers.
How to connect the speaker cable
Pull up the lid. Insert the edge of the cable. Put the lid back down.
• Bundle the cables of the external
speakers with clamps as shown above.
CAUTION
• Make sure external speakers have 8 ohm and 10 watt
specifications.
• Connect the plus/minus jacks with the correct cables.
Incorrect connection may cause a short.