Operating instructions

Other viewing options
2
7
5
_ROf_T
3
switch
DTV control buttons
For viewing DTV broadcasts, a digital TV tuner
(commercially available) is necessary.
When the Mode switch is set to CBL!SAT/DTV, the
remote control unit buttons will function as shown
below.
• Operate the tuner using t to 10.
1 0 9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
2 * (DOT)
Used for channel selection.
3
4
5
CH &/V
Press CH • or CHY to tune in a higher or lower channel.
SOURCE POWER
Turns the digital TV tuner on and off.
SET/ENTER, A/Y/_I/I_
SET/ENTER: Press to activate the selected function.
• /Y/_I/_-: Press the button to select items on the DTV
MENU screen.
7
8
9
10
FAVORITE CH/Colored (bluelgreen/red/yellow)
FAVORITE CH: Used for making FAVORITE CH settings
with the digital TV tuner.
Blue/green/red/yellow: Used to make selections from
the digital TV tuner menu.
FLASHBACK
Press to switch between the current channel and the
channel you were watching immediately before.
DTV/DVD TOP MENU
When this button is pressed, the DTV menu screen will
display.
DTV/SAT GUIDE
When this button is pressed, the DTV guide screen will
display.
DTV/SAT INFO
When this button is pressed, information on DTV will
display.
• CABLE, SAT and DTV cannot be selected at the same
time.
• The color-highlighted buttons on the remote control can
learn the control signal from another device's remote
control.
-73