Operating instructions

Other viewing options
3
4
5
switch
SAT control buttons
When the SAT is preset by the learning remote control
function, the remote control unit buttons will function
as shown below.
• When the Mode switch is set to CBL/SAT/DTV,
satellite broadcast tuners made by other
manufacturers and not preset can also operate
with the remote control unit if t to 7 have learned
the functions. (See page 68.)
1 0 9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
2 SOURCE POWER
Turns the Satellite broadcast tuner power on and off.
SET/ENTER, A/Y/_I/I_
SET/ENTER: Press to activate the selected function.
A/Y/_I/_-: Press the button to select items on the SAT
GUIDE screen or SAT MENU screen.
4 100 ENT
Fix the selected channel with the direct channel
selection buttons.
• Use this button to learn if necessary.
5 SAT MENU
When this button is pressed, the satellite broadcasting
menu screen will display.
6 SAT GUIDE
When this button is pressed, the satellite broadcasting
guide screen will display.
7 SAT INFO
When this button is pressed, information on satellite
broadcasting will display.
• Use this button to learn if necessary.
• CABLE, SAT and DTV cannot be selected at the same
time.
• The color*highlighted buttons shown in the figure at left
can learn the control signal from another device's remote
control.
-72