Operating instructions

Other viewing options

REC_iVE_

Cable control buttons

When the Mode switch is set to CBL/SAT/DTV the

cable converter connected to the Display can operate

using 1 to 5.

Cable converters made by other manufacturers and

not preset can also operate using the remote control

unit if 1 to 5 have learned the functions. (See page

681)

1 0 9

Press a button (or buttons) that corresponds to the

channel that you wish to watch.

2 CH &/•

Press CH • or CH • to tune in a higher or lower

channel.

3 SOURCE POWER

Turns the cable converter power on and off.

4 100 ENT*

Fix the selected channel with the direct channel

selection buttons.

5 FLASHBACK*

Press to switch between the current channel and the

channel you were watching immediately before.

* Some manufacturers do not preset 100 ENT and

FLASHBACK. Use these buttons to learn if necessary.

* CABLE, SAT and DTV cannot be selected at the same

time.

* The ooloFhighlighted buttons on the remote control can

learn the control signal from another device's remote

control.

1_ -71