Operating instructions

Useful adjustment settings
• Some input signals may have to be registered manually
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
I
640 x 400 720 x 400 I
I
640 x 480 848 x 480
1024 x 768 1280 x 768
Produces a clearer video image.
r,'ENU TV, SAT,DVD DP_ VD 0
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 6 input signals listed above.
Press MENU and the TV MENU screen
displays.
_,_E,_u TWSAT/OVD DW_VDtop
Press MENU and the PC MENU screen
displays.
Press <1/1_to select "Option".
Press A/V to select "Noise Clean", and then
press SET/ENTER
• Some items may be grayed out. They are not
selectable.
Option
Press <1/1_ to select "Setup".
Press A/V to select "Input Signal" and then
press SET/ENTER
Setup
Press A/V to select the desired level, and
then press SET/ENTER
Press A/V to select the desired input signal
on the display.
Example
• "Noise Clean" is not selectable when channel display
shows an input resolution of 480P, 720P or 10801.
_) -54