Operating instructions

Useful adjustment settings

You can move the picture around on the screen.

_L_SH_ACK

Press A/T/</I_ to move an image on the screen to

the desired position. Press SET/ENTER to return to

the initial image position.

• While pressing A/T/</I_, an on-screen image,

"Adjusting Position" displays to the desired position.

• This setting cannot be stored. Once the System shuts

down or enters standby mode, the setting is erased. To

move the picture around the screen again, you must

perform the above procedure again.

• The image position setting using the steps on page 47

can be stored. Select either according to your objectives.

• "TV", "INPUT1", "INPUT2", "INPUT3" and "INPUT4" can

each adjust the image position setting on this page. The

same for view modes.

• An on-screen image from a PC source cannot be moved

around.

• Even when the image fills the screen, its position can be

adjusted with this function.

• Initialize the image position by pressing SET/ENTER

_) -48