Operating instructions

Using external equipment

You can use the INPUT 3 terminal when connecting a Digital TV tuner and other audiovisual equipment.

AVC System (rear view)

Component video cable

(commercially available)

S_video cable i

(commercially available) AV cable

(commercially available)

DVl cable (commercially available)

When using DVl cable, select "DVI"

for "Input Select" in the menu.

When using component

video cable, select

"COMPONENT" for

"Input Select" in the

menu.

@@@

Digital TV tuner

,,r

Av H_o_ r

To watch a Digital TV tuner image, select "INPUT3"

from the "INPUT SOURCE" menu using INPUT on the

remote control unit or on the Display. (See page 50.)

Then select "INPUT3" on "Input Select" in the "Option"

menu to set the correct input signal type. (See page

50.)

The setting is stored and can be selected on the

"INPUT SOURCE" menu.

For INPUT3 signal

• Each time INPUT is pressed, the input source toggles.

• If the Digital TV tuner image does not come in clearly, you

may need to change the input signal type setting on the

"Input Select" menu.

• Refer to your Digital TV tuner operation manual for the

signal type.

• DVPDIGITAL INPUT cannot connect to a PC. Input

resolution is compatible with 10801, 720P, 480P and VGA

(60Hz).

• Use the PC INPUTterminals on the front of the AVC System

when connecting a PC. (See page 46.)

• When connecting to the DVI-DIGITAL iNPUT terminal, be

sure to use a commercially available DVl cable with ferrite

core attached.

-44