Operating instructions

Using external equipment
You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment.
AVC System (rear view)
Av H_o_r
sum i_1_ CH
AV cable
(commercially available)
S-VIDEO cable
(commercially available)
@@@@
VCR
TO watch a VCR image, select "INPUT2" from the
"INPUT SOURCE" menu using INPUT on the remote
control unit or on the Display. (See page 50.)
When connecting to the INPUT 2 terminals, select
"INPUT2".
You only need to select the input source on the "INPUT
SOURCE" menu.
• Each time INPUT is pressed, the input source toggles.
• Refer to your VCR operation manual for the signal type.
I_ -43