Operating instructions

Basic adjustment settings
Power control setting allows you to save energy.
Power management
When set, the power will automatically shut down.
r_F,u TV;SA_;DVD _rV_VE__r _
Power save
Press MENU and the PC MENU screen
displays.
Press <1/1_to select "Power control".
Press A/V to select "Power Save", and then
press SET/ENTER
Powercontrol
Press MENU and the PC MENU screen
displays.
Press </1_ to select "Power control".
Press A/V to select "Power Management",
and then press SET/ENTER
Power control
Press A/V to select "Model" or "Mode2",
and then press SET/ENTER
Press </1_ to select the desired backlight
brightness, and then press SET/ENTER
• When setting to "Auto", the OPC indicator lights up green,
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
Off
Model
Mode2
• No power management
• Factory preset value
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the PC and the signal
inputs again, the System stays off.
• The System turns on again by pressing
POWER button on the Display or TV
POWER on the remote control unit (See
page 21).
• If no signal inputs for 8 seconds, the power
shuts down.
• When you start using the PC and the signal
inputs again, the System turns on.
40