Operating instructions

Watching TV

When you turn on the System for the first time, it will automatically memorize the broadcasting channels where

you live. Perform the following steps before you press TV POWER on the remote control unit.

1. Insert the batteries into the remote control unit. (See page 13.)

2. Connect the antenna cable to the AVC System. (See pages 17 to 19.)

3. Plug in the AC cord to the AC outlet. (See page 20.)

Language setting

Select from among 3 languages: English, French and

Spanish.

Press A/V to select the desired language

listed on the screen, and then press SET/

ENTER.

f,!ENU TV;_AIIUW _7/_/_ rD!,

I_ECE_VE_ _

Channel search

Channel auto search makes the System look for all

channels viewable in the set area.

Antenna setting

• Make sure what kind of connection is made with your

System when selecting "Air" or "Cable" for both ANT*A

and B.

Press <1/1_to select "Air" or "Cable" for ANT-

A, then press A/V to move down.

Press </1_ to select "Air" or "Cable" for ANT-

Press SET/ENTER to enter the setting.

• This operation makes the System search for

both ANTRAand B.

Example

Noise Clean

• Make sure what kind of connection is made with your

System when selecting "Air" or "Cable" for both ANTRA

and B.

• If no channel is found, make sure what kind of connection

is made with your System and try EZ setup again (see

page 27).

• The illustrations and omscreen displays in this operation

manual are for explanation purposes and may vary slightly

from the actual operations.

-22