Operating instructions

Watching TV
Display
_ 0
POWER button
MAIN POWER
POWER indicator
I_ OPC
CO o o
m
m_
MAIN
POWER
AVC System
STANDBY/ON indicator
T,/ SAT
I ,
Press MAIN POWER on the Display.
• The POWERindicator on the Display flashes red.
Press MAIN POWER on the AVC System.
• The System turns the power on.
• The POWER indicator on the Display lights up green and the
STANDBY/ON indicator on the AVC System lights up green
• If the STANDBY/ON indicator on the AVC System and the POWER
indicator on the Display still light up red, press TV POWER on
the remote control unit or MAIN POWER on the AVC System to
turn the System on
First time turning on the AVC System
Press MAIN POWER on the AVC System.
• The STANDBY/ONindicator on the AVC System lights up red.
Press MAIN POWER on the Display.
• The System turns the power on.
• The POWER indicator on the Display lights up green and the
STANDBY/ON indicator on the AVC System lights up green
• If the STANDBY/ON indicator on the AVC System and the
POWER indicator on the Display still light up red, press TV
POWER on the remote control unk or POWER button on the
Display to turn the System on
• The initial setup starts when the System powers on for the first time. If the
System has been turned on before, the EZ setup will not be invoked. See
page 27 to try EZ setup from the Setup menu
Press TV POWER on the remote control unit or
POWER button on the Display.
• TheSystem enters standby mode and the imageon the screen
disappears
• Both the STANDBY/ON indicator on the AVC System and the
POWERindicator on the Display change from green to red
Press MAIN POWER on the AVC System.
• The STANDBY/ONindicator on the AVC System turns off and
the POWERindicator on the Display flashes red.
Press MAIN POWER on the Display.
• The POWERindicator on the Display gradually turns off
• If you are not going to use this System for a long period of time, be sure to
remove the AC cords from the power outlet
• When the STANDBY/ON indicator lights up red, it takes about 10 to 15
seconds for the indicator to turn off if MAIN POWER on the AVC System is
Display status indicator turned "Off" or the AC cord is unplugged from the AC outlet.
Off Power off
Flashing red AVC System does not turn on or its AC cord is disconnected.
Red The System is in standby mode.
Green The System is on.
AVC System status indicator
Off Power off
Red Only the AVC System is in standby mode or the System is in standby mode.
Green The System is on.
1_ "21