Operating instructions

Part names
PCiNPUTterminal(AUDIO)
PCiNPUTterminal(ANALOGRGB) speakersis muted.)
Headphone
(Whenconnectingheadphones,thesoundfromthe
How to open the door.
* If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this
case, press CLEAR, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object.
This will reset the System as shown below.
• AV MODE resets to USER
• TV channel returns to initial channel setting (Air:2ch, Cable:l or 2ch)
• Twin picture resets to normal
• Audio setting initializes
• SRS resets to off
• Image position initializes
• Pressing CLEAR will not work if the System is in standby mode (indicator lights red).
• Pressing CLEAR will not delete channel preset or secret number. See page 61 for clearing the secret number when you
know it. See page 83 for initializing to the factory preset values when you forget your secret number.
DC OUTPUT terminal
(Terminal for expanded functionality in
the near future.)
Antenna (A) input terminal DVI-DIGITAL RS-232C
Antenna (A) output Antenna (B) INPUT terminal
terminal input terminal
DISPLAY OUTPUT 2 terminal
DISPLAY OUTPUT 1 terminal
AC INPUT terminal
INPUT2terminal(VIDEO)
INPUT2 terminal(S_VIDEO)
INPUT1terminal(S-VIDEO)
INPUT1 COMPONENT
videoterminals(Y,PB,P_)
INPUT1terminal
(VIDE0)
INPUT1terminals
(AUDIOL/R)
INPUT3COMPONENT
videoterminals(Y,PB,P_)
INPUT3 terminals(AUDIOL/R)
INPUT3 terminal(S_VIDEO)
iNPUT3 terminal(VIDEO)
INPUT2terminals
(AUDIOL/R) MONITOROUTPUTterminal
(S-VID[0)
MONITOROUTPUT
terminal(VIDEO)--
MONITOROUTPUTterminals(AUDIOL/R)
-15