Operating instructions

Preparation
After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamps for bundling the cables.
Removing the terminal cover
Display (rear view)
[]
_J _J 1D f- Press the two hooks
| toward the center of the
| Display and remove the
/ cover toward you.
IIIII
L Press down the two
upper hooks to remove
the cover toward you.
Connecting the system cable and the AC cord to the Display
AC cord
(GRAY)
Connect the plug firmly
the terminal and secure System cable until the hooks on both
it by tightening the sides click.
thumb screws.
Connecting the system cable and the AC cord to the AVC System
tem cable
(GRAY) _ _ (WHITE)
AVC System (rear view)
,,, TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
(_-10 AC CORD CONNECTED.