Operation Manual

10
Preparation
Connecting a Digital TV Decorder (Set Top Box)
You can use the INPUT 1/INPUT 2 (component) or INPUT 4/INPUT 5/INPUT 6 (HDMI) terminals when connecting
to a Digital TV Decorder (Set Top Box) and other audiovisual equipment.
NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 6. (See page 36.)
When using HDMI cable
(commercially available)
When using component cable
(commercially available)
L
R
AUDIO
Y
P
B
(CB)
PR
(CR)
Digital TV
Decoder
(Set Top Box)
Digital TV Decoder
(Set Top Box)
Using Digital Audio Output
It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal. PCM audio outputs from the
terminal.
To optical digital input of
external audio devices
Optical fi bre cable
(commercially available)
Connecting a PC
You can use the INPUT 7 (PC) terminals when
connecting to a PC. (See page 39.)
ANALOGUE
RGB
AUDIO
(R/L)
PC
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the
same audio from the speakers. (The audio of the content
you are viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output
some signals, depending on devices and software.
Ø3.5 mm stereo minijack
RGB cable
(commercially
available)
Ø3.5 mm
stereo minijack
cable(commercially
available)
37GX3H_en_b.indd 1037GX3H_en_b.indd 10 2007/11/14 10:59:232007/11/14 10:59:23