Operation Manual

Preparation
8
1
Before turning on the power
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Bundling the cables
4
AC cord
Connecting the AC cord
AC outlet
• Place the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
TV (rear view)
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Room antenna terminal
(75-ohm type)
Antenna cable
(commercially available)
To antenna
terminal
Connecting external devices
See pages 9 to 10 for connecting antennas and external equipment, such as a VCR and DVD player.
2
3
the openings
1
Press the two latches
and open the cover.
2
Pass the cable through
the cable clamp.
b
the backside of the TV
3
Place the cover in a way that the cables
will properly run through the openings.
Cable clamp
37GX3H_en_b.indd 837GX3H_en_b.indd 8 2007/11/14 10:59:162007/11/14 10:59:16