使用說明書 OPERATION MANUAL 使用說明書 使用說明書 中文 (簡體) OPERATION MANUAL 使用說明書 Printed on 100% post-consumer recycled paper.
Cover2_19A33X.
ENGLISH ENGLISH OPERATION MANUAL Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. Contents Introduction Dear SHARP customer ................................................................................................ 1 Contents .....................................................................................
Contents Watching TV (Continued) Reducing the start-up time ........................................................................... 25 Password setting for the child lock (for TV input mode) ................................ 26 Energy conservation settings ................................................................................... 27 Auto power-off at a designated time ............................................................. 27 Auto power-off after the end of broadcast ......................
Important Safety Precautions • Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement. • Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock.
Supplied accessories Make sure the following accessories are provided with the product. Remote control unit “AAA” size battery (g2) Always use the AC cord supplied with the TV. Used with batteries inserted. Page 7 Page 12 Safety restraints Restraining brackets Screws for brackets AC cord Clamps Page 8 Operation manual Screws for clamps Page 11 Trademarks • TruSurround XT, SRS and h® symbol are trademarks of SRS Labs, Inc.
Preparation Part names TV (Front/Top) POWER (On/Off) button Volume up (e)/down (f) buttons Channel up (r)/down (s) buttons MENU button TV/VIDEO button Remote control sensor Such sensor is not applicable to Hong Kong model. OPC indicator* OPC sensor POWER indicator** SLEEP timer indicator *OPC: Optical Picture Control (See page 32.) ** See page 13 for the TV status indicator.
Preparation TV (Rear) AC INPUT terminal INPUT 3 terminals Headphone jack INPUT 4 (HDMI) terminal INPUT 5 (HDMI) terminal INPUT 6 (HDMI) terminals INPUT 7 (PC) terminal SERVICE ONLY terminal* DIGITAL AUDIO OUTPUT terminal Antenna input terminal RS-232C terminal INPUT 1 terminals INPUT 2 terminals MONITOR OUTPUT terminals *Usually do not connect anything to this terminal as it is reserved only for service personnel. Regarding the headphone jack • Use headphones with a stereo mini plug (Ø 3.5 mm).
Preparation Remote control unit 1 2 1 3 4 2 3 5 11 6 7 8 4 12 5 6 7 13 14 15 9 10 11 16 12 8 17 13 9 18 14 10 19 15 16 17 18 POWER (STANDBY/ON) To switch the power on and off. (See page 13.) 0–9 Set the channel. (See page 18.) A (Flashback) Press to return to the previous selected channel or external input mode. (See page 24.) MPX Select the sound multiplex mode. (See page 25.) e (Mute) Mute the sound. (See page 24.) VOLk/VOLl Set the volume. (See page 18.
Preparation Before turning on the power Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. • Do not turn on the power of the TV before connecting the AC cord. 1 Connecting the antenna cable To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable.
Preparation Connecting external devices You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital TV Decoder (Set Top Box) and PC. To view external source images, select the input source from TV/VIDEO on the remote control unit or TV/VIDEO on the TV. CAUTION • To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV Decoder (Set Top Box), PC or other external equipment.
Preparation Connecting a Digital TV Decorder (Set Top Box) You can use the INPUT 1/INPUT 2 (component) or INPUT 4/INPUT 5/INPUT 6 (HDMI) terminals when connecting to a Digital TV Decorder (Set Top Box) and other audiovisual equipment. NOTE • When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 6. (See page 36.
Preparation Protection against overturning There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-resistant measurement for your safety. Anchoring the TV to the wall or a pillar 1 Affix the 2 clamps (supplied) to the product using the screws (supplied). 2 Affix the TV to the wall using extra strong ties (commercially available).
Preparation Inserting the batteries Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover. 2 Insert the two supplied “AAA” size 3 Close the battery cover. batteries. • Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.
Preparation Turning the TV on/off Turning on the power Turning off the power Press POWER on the TV. • POWER indicator (Green): The TV is on. (After a few seconds, an image appears with sound.) • After turning the power “ON” by pressing POWER on the TV, you can turn the power ON/OFF by pressing POWER on the remote control. POWER button Press POWER on the remote control. • The TV enters standby mode and the image on the screen disappears. • The POWER indicator on the TV changes from green to red.
Preparation About Menu operations w Using the control panel of the TV What is Menu? • You need to bring up the On-Screen Display to perform settings for the TV. The On-Screen Display for the settings is called “Menu”. • The Menu enables various settings and adjustments. (See pages 15 and 16.) • The Menu can be operated with the remote control unit. You can also operate the Menu using the control panel of the TV.
Preparation TV/AV input mode menu items List of TV/AV menu items to help you with operations Picture AV Mode ..................................................................... Page 31 OPC ............................................................................. Page 32 Backlight .................................................................... Page 32 Contrast ...................................................................... Page 32 Brightness ...............................................
Preparation PC input mode menu items List of PC menu items to help you with operations Setup Picture AV Mode ..................................................................... Page 31 OPC ............................................................................. Page 32 Backlight .................................................................... Page 32 Contrast ...................................................................... Page 32 Brightness ..............................................
Watching TV Setting channels automatically You can run auto installation again, even after setting up the preset channels. 4 If you have already set the password, enter it here. • See page 26 for setting a password. 5 6 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Auto Installation”, and then press ENTER. MENU Press a/b to select “Yes”, and then press ENTER. Press a/b to select the desired language listed on the screen, and then press ENTER.
Watching TV Selecting programmes Adjusting the volume You can change channels in several ways. Using CHr/s on the remote control unit • Press CHr to increase the channel number. • Press CHs to decrease the channel number. NOTE • CHr/s on the TV operates the same as CHr/s on the remote control unit. Changing the volume You can change the volume on the TV or on the remote control unit. • To increase the volume, press VOLk. • To decrease the volume, press VOLl.
Watching TV Setting channels to your preference You can run the auto search procedure again at any time by accessing the Setup menu and Programme Setup. Channels can be tuned automatically or manually. Auto search Manual setting for each channel You can also automatically search by performing the procedure below. This is the same function as programme auto search in auto installation. 1 2 3 You can set some channel items manually.
Watching TV Manual setting for each channel (continued) Search tuning 1 Colour system Press a/b/c/d to select the channel you want to edit, and then press ENTER. 1 • The selected channel information displays. 2 Press a/b to select “Search”, and then press ENTER. MENU Press a/b/c/d to select the channel you want to edit, and then press ENTER. • The selected channel information displays. 2 Press a/b to select “Colour System” and then press ENTER. • Receivable colour systems are listed. [Setup ...
Watching TV Manual setting for each channel (continued) Skipping channels Channels with “Skip” set to “On” are passed over when using CHr/s even if selected while watching the image from the TV. 1 Press a/b/c/d to select the channel you want to edit, and then press ENTER. • The selected channel information will be displayed. 2 Press a/b to select “Skip”, and then press ENTER. Sorting programmes Channel positions can be sorted freely. 1 Press MENU and the MENU screen displays.
Watching TV Erasing programmes Labelling programmes The individual programme can be erased. Channels can be labelled freely. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Programme Setup”, and then press ENTER. If you already set the password, enter it here. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Programme Setup”, and then press ENTER. If you already set the password, enter it here.
Watching TV Useful viewing functions Split-screen viewing This function is conveniently used when, for instance, watching cooking programmes and taking notes. Split-screen You can display two pictures except when inputting from the RS-232C or PC INPUT terminal. 1 2 Press P&P. • Split-screen displays and a selected input source image displays. Picture and still image You can freeze a motion picture on the Display. 1 Press FREEZE.
Watching TV Returning to the previously selected channel Press A to switch the currently tuned channel to the previously tuned channel. Press A again to switch back to the currently tuned channel. Press A to toggle between the currently selected input source and the previously selected one. Muting the audio temporarily Using Mute (e) on the remote control unit e mutes the current sound output. 1 Press e. 2 Press e again within 30 minutes to cancel the mute. • The sound is silenced.
Watching TV Switching the analogue audio format You can switch between multiple audio modes when watching a multiple audio or stereo broadcast programme. When receiving a bilingual signal Each time you press MPX, the mode switches among CH A, CH B and CH AB. Bilingual mode BBC2 99 PAL In the NICAM TV broadcasts When receiving a stereo signal Each time you press MPX, the mode switches between NICAM STEREO and MONO.
Watching TV Password setting for the child lock (for TV input mode) Allows you to use a password to protect certain settings from being accidentally changed. Setting a channel 1 Repeat steps 1 to 4 in Setting a password. 2 Press a/b to select “Channel Setting”, and then press ENTER. 3 Press a/b to select “Yes”, and then press ENTER. Change Password Setting a password Register a 4-digit password number to use the Child Lock function.
Watching TV Energy conservation settings Auto power-off at a designated time This function is conveniently used when, for instance, going to bed while watching TV. Auto power-off after the end of broadcast You can set the TV to automatically power off in about 15 minutes after the TV goes into a state of receiving no programme signals, such as the end of a broadcast day. 1 1 Press SLEEP. • Remaining time displays when sleep timer has been set. 2 Press MENU and the MENU screen displays.
Watching TV Power Management Ecology You can set the TV to automatically power off when no image is displayed on PC. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Power Control”. 3 Press a/b to select “Power Management”, and then press ENTER. 4 Press a/b to select “Mode1” or “Mode2”, and then press ENTER. When set to “Yes”, The TV activates the following power saving mode.
Watching TV Picture size settings Selecting the Wide Screen Signalling (WSS) picture size automatically WSS allows a television to switch automatically among the different screen formats. Selecting the Wide Screen Signalling (WSS) picture size manually The WSS signal has 4:3 auto-switching that allows you to select between Panorama and Normal. 1 Press MENU and the MENU screen displays. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 2 Press c/d to select “Setup”.
Watching TV Selecting the picture size manually Manual Selection You can select different picture sizes that account for the kind of each picture. 2 Press WIDE or a/b while the WIDE MODE menu displays on the screen. • As you toggle down the options, each mode is immediately reflected on the TV. Auto Selection If you set “WSS” and “4:3 Mode” in the Setup menu on page 29, the optimum WIDE mode is automatically chosen for every broadcast containing the WSS information. 1 Press WIDE.
Watching TV Selecting a preset AV MODE The AV MODE function enables you to select appropriate settings for audio and video to account for the system environment which can vary due to factors like room brightness, type of programme watched or the type of image input from external equipment. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Picture”. 3 Press a/b to select “AV Mode”, and then press ENTER. 4 Press a/b to select the desired item, and then press ENTER.
Watching TV Manual picture settings Picture adjustment You can adjust the picture to your preference. Follow the steps to adjust the picture. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Picture”.
Watching TV Advanced picture settings The advanced settings enable you to set the picture adjustment in more detail. There are five options you can choose from. Press MENU and the MENU screen displays. 1 w 3D-Y/C Provides high quality images with minimal dot crawl and cross colour noise. Selected item 2 Press c/d to select “Picture”. 3 Press a/b to select “Advanced”, and then press ENTER. 4 Press a/b to select the desired menu, and then press ENTER.
Watching TV Other picture settings DNR (Digital Noise Reduction) Reduces noise on the screen and produces a clearer video image. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Press a/b to select “DNR”, and then press ENTER. 4 Press a/b to select the desired level, and then press ENTER. Game Play Time This function displays the elapsed game time so you do not lose track of the time.
Watching TV Audio adjustment You can adjust the audio of the selected AV mode. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Audio”. Audio Power Control Output Volume Select Allows you to select what controls the audio output. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Press a/b to select “Output Volume Select”, and then press ENTER. 4 Press a/b to select “Fixed” or “Variable”, and then press ENTER.
Settings when using external devices Settings when using HDMI output devices HDMI terminals can carry audio and visual signals to the TV with an HDMI certified cable. When you want to output the audio and picture from an HDMI output device on the TV, select “INPUT4”, “INPUT5” or “INPUT6” by switching the input source. Connecting an HDMI output device HDMI cable (commercially available) HDMI output device Ø3.
Settings when using external devices Selecting the input source and signal type Selecting input source Can use for selecting the input source. Using TV/VIDEO on the remote control unit or on the TV TV/VIDEO allows you to choose from the available input sources. Selecting input signal type For setting the signal type of external equipment. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Press a/b to select “Input Select”, and then press ENTER.
Settings when using external devices Labelling input sources You can assign each input source a label as you prefer. 1 Press TV/VIDEO to select the desired input source. 2 Press MENU and the MENU screen displays. 3 Press c/d to select “Setup”. 4 Press a/b to select “Input Label”, and then press ENTER. Press a/b to select characters and c/d to move to the desired digit to label the input source.
Connecting a PC Use the PC terminals to connect a PC. NOTE • The PC INPUT terminals are DDC1/2B-compatible. • Refer to page 44 for a list of PC signals compatible with the TV. Ø 3.5 mm stereo minijack cable (commercially available) RGB cable (commercially available) PC ANALOGUE RGB AUDIO (R/L) Signal names for 15-pin mini D-sub connector Pin No. 5 4 10 15 13 1 6 7 8 9 14 2 3 12 11 Signal name R G B Not connected CSYNC Pin No.
Connecting a PC Selecting the picture size You can select the picture size as illustrated below. NOTE • Connect the PC before making adjustments. • Selectable picture size may vary with input signal type. Connecting a PC RGB cable (commercially available) Ø3.5 mm stereo minijack cable(commercially available) PC ANALOGUE RGB AUDIO (R/L) 1 Press WIDE. • The WIDE MODE menu displays.
Connecting a PC Adjusting the PC image automatically This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available RGB cable, etc. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Adjusting the PC image manually Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync.
Connecting a PC Input resolution settings Selecting the input resolution • Some input signals may have to be registered manually to display properly. • The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.
Connecting a PC PC Control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Attach an RS-232C cable cross-type (commercially available) to the Din/D-sub RS-232C for the connections. NOTE • This operation system should be used by a person who is accustomed to using PCs.
Connecting a PC PC compatibility chart VESA Horizontal Vertical Frequency Frequency Standard Resolution VGA SVGA VESA Horizontal Vertical Frequency Frequency Standard Resolution 1024 g 768 48.4 kHz 60 Hz ✓ 1024 g 768 56.5 kHz 70 Hz ✓ 1024 g 768 60.0 kHz 75 Hz ✓ 1360 g 768 47.7 kHz 60 Hz ✓ 1280 g 1024 64.0 kHz 60 Hz ✓ SXGA+ 1400 g 1050 65.3 kHz 60 Hz ✓ 720 g 400 31.5 kHz 70 Hz 640 g 480 31.5 kHz 60 Hz ✓ 640 g 480 37.9 kHz 72 Hz ✓ 640 g 480 37.
Appendix Troubleshooting The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced. Problem Possible Solution • No power. • Check if you pressed POWER on the remote control unit. (See page 13.) If the indicator on the TV lights up red, press POWER. • Is the AC cord disconnected? (See page 8.) • Has the power been turned on? (See page 13.) • Unit cannot be operated. • External influences such as lightning, static electricity, etc.
Appendix Reset If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Reset”, and then press ENTER. 4 Press a/b to select “Yes”, and then press ENTER. • When “Reset” is completed, the backlight will turn off and then on in a short period of time. • The screen will be returned to its original state.
Appendix Specifications Model Item LC-37GX3H LCD panel 37o (940 mm) Advanced Super View & BLACK TFT LCD Resolution 2,073,600 pixels (1920g1080) Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV Function PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M TV-Standard Receiving Channel VHF/UHF 44.25—863.
Appendix Dimensional drawings Unit: mm LC-37GX3H 580 94 904 123 87 72 400 464 596 668 825 293 300 142 300 48 37GX3H_en_h.
Appendix Mounting the TV on the wall Removing the stand For wall mounting with the optional bracket, remove the stand. Before detaching/attaching the stand • • • • Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet. Remove all terminal covers and connected cables. Lay the TV down on cushioning (such as a blanket) over a table. Make sure two or more people perform the operation. CAUTION • Do not remove the stand from the TV unless using an optional bracket to mount it.
Appendix Handling and precautions with the wall-mounted TV • You can mount the TV on the wall using the optional AN-37AG2 bracket and AN-37P30 attachment. • For details, refer to the instructions supplied with the optional bracket. NOTE • The AN-37P30 attachment is always required when attaching the AN-37AG2 bracket to a wall. CAUTION • This TV should be mounted on the wall only with the AN-37AG2 (SHARP) / AN-37P30 (SHARP) wall mount bracket.
Appendix When using wall mount bracket AN-37AG2 1010 91 115 437 657 129 wall markings 105 tape 520 dimensional markings When using attachment AN-37P30 of wall mount bracket AN-37AG2 300 70 20° 412 142 300 367 112 Affix the label indicating the center of the TV monitor to wall mount bracket AN-37AG2. The letter ‘B’ on the label shows the center point of the TV monitor. Affix wall mount bracket attachment AN-37P30 (commercially available) to the AN-37AG2.
Appendix CLEARING THE PASSWORD If you forget your password, set a new password using the following procedure. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”. 3 Press a/b to select “Child Lock”, and then press ENTER. 4 The password input screen displays. 5 If you enter “3001” using 0 - 9, the “Child Lock” setting menu will be displayed. 6 Enter the 4-digit number as a password using 0 - 9. (See page 26.) The new password is now set. The Password is .
Cover2_19A33X.
使用說明書 OPERATION MANUAL 使用說明書 使用說明書 中文 (簡體) OPERATION MANUAL 使用說明書 Printed on 100% post-consumer recycled paper.
