Manual

Usingexternalequipment
To watch an HDMI equipment image, select
INPUT4 or INPUT 5 from "INPUT SOURCE"
menu using INPUT on the remote control unit
or on the TV.
Press MENU to display the MENU screen, and
then press _11/i_ to select "Option".
Press A/Y to select "HDMI Setup", and then
press ENTER.
HDMI Setup
This setting allows you to skip the HDMI Input on the
Input Selection operation.
Press MENU to display the MENU screen, and
then press _/1_ to select "Setup".
Press A/Y to select "Input Skip", and then
press ENTER.
Press A/Y to select the Input (INPUT 4 or
INPUT 5) you wish to skip, and then press
ENTER.
Input 4 (HDMI}
Press _1/1_ to select "Yes", and then press
ENTER.
Press MENU to exit.
Press A/Y to select the desired item, and
then press ENTER.
Press _11/I_to select the desired setting, and
then press ENTER.
Auto View
Audio
Select
Enable
Disable
Digital
Analog
Set whether or not to use
View Mode based on signal
recognition, including an HDMI
signal.
Select "Digital" for an audio
signal via the HDMI terminal.
Select "Analog" for an audio
signal via the R-AUDIO -L
terminal.
Press MENU to exit.
,, Refer to your external equipment operation manual for the
signal type.
,, "Audio Select" is only available for INPUT 5.
,, When connecting an HDMFDVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
Q- 31