Manual

Useful adjustment settings
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
INPUT FLASHBACK0
VOL CH
FREEZE MENU
O @
_ R_N
Press INPUT to select the desired input
source.
Press MENU to displaythe MENU screen,and
then press 4/I_ to select"Setup".
Press A/V to select"InputLabel",and then
press ENTER.
Press A/V/_/I_ to selectthe new name for
the inputmode, and then press ENTER.
Example
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
• The remaining time displays when the sleep timer
has been set.
ISleep Timer: Remaining 30 L
Each time you press SLEEP, the remaining
time switches as shown below.
• When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time setting.
• Five minutes before the time expires, the
remaining time displays every minute.
L -I g0 IJ
• Select "Off" by pressing SLEEP to cancel the sleep timer.
• The TV will enter standby when the remaining time reaches
zero.
• When the sleep timer is set, its indicator on the TV lights
red.
Press MENU to exit.
• You cannot change labels if the INPUT SOURCE is TV.
Q- 36