Manual

Using e×ternal equipment
To view external source images, select the input
source from INPUT on the remote control unit or on
the TV.
- VOL ÷ N/ CH /_ INPUT MENU POWER _
o==o c==o @ O O
INPUT F ASHBACK@©
VOL CH
FREEZE MENU
0 @
¢
Press INPUT.
• A list of selectablesources appears.
INPUT1
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 3, you may need
to change the input signal type setting on the "Input
Select" menu.
Press MENU to display the MENU screen, and
then press 4/1_ to select "Option".
Press A/V to select "Input Select", and then
press ENTER.
[6/ Option
Press A/V to select the signal type you want
to set, and then press ENTER.
If the selectedsignaltype is incorrect, imagesare
not displayedor displayedwithout anycolor.
Press MENU to exit.
• The setting is stored and can be selected on the
"INPUT SOURCE" menu.
Press INPUT again to select the input source.
• An image from the selected source automatically
displays.
• Each time INPUT is pressed, the input source
toggles.
• You can also select the input source by pressing
A/T.
,, Ifthe corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
• Refer to your external equipment operation manual for the
signal type.
• If you set INPUT 1 or 3 to Auto, the TV will automatically
select the input signal.
• Setting INPUT 1 or 3 signal selection to "Auto" when
other equipment is connected will result in the following
connection priority.
INPUT 1 or 3:
COMPONENT VIDEO
{_) VIDEO
• See pages 13 to 16 for external equipment connection.
(_- 32