Manual

Watching 33/
You can change channels in several ways.
_ VOL + V CH/X INPUT MENU POWER "_
c===_ _ O O O
Method 1
Using OH A./V on the remote control unit or on the
TV.
Method 2
1 Press FLASHBACK to switch to the previously
tuned channel.
2 Press FLASHBACK again to switch back to the
currently tuned channel.
INPUT FLASHBACK
O
VOL CH
FREEZE MENU
C®S
RE6R
-- FAVORFE CH --
®®©@
AQUOS
FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0-9, * (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.
To select a 1 or 2-digit channeJ number
(e. g., Channel 5):
Press 5-->ENT
When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
To select a 3-digit channel number
(e. g., Channel 115}:
Press 1-->I-->5-->ENT
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2 -->2--> * (DOT) _I_ENT
When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
If you push "0" by itself, nothing will happen.
Complete the above steps within a few seconds.
When you enter 0-9 and (DOT), channel selection will be
made if there is no operation within a few seconds.
@-19