U DE CRISTAL LIQUIDO OPERATION MODE MANUAL MANUAL D'EMPLOI DE OPERACION / / /
LiQUiD CRYSTAL TELEViSiON OPERATION MANUAL ,, The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. ,, Some items may be grayed oHt. They are not selectable. IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Mode! No.: Serial No.
IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WiDE BLADE OF PLUG TO WIDE SLOT, FULLY iNSERT. CAUTmON: DO NOT PLACE THiS PRODUCT ON AN UNSTABLE CART, STAND_ TRIPOD, BRACKET, OR TABLE.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystam Television. To ensure safety and many years of trouble-free operation of your product, please read the iMPORTANT SAFETY iNSTRUCTiONS carefully before using this product, IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY INSTRUCTIONS ,_ Water and Moisture wash bowl, kitchen Do not use this product sink, or laundry near water tub; in a wet basement; for example, near a bath tub, or near a swimming pool; and the _. /,_{_# '] "_1 _ _ | product on an unstable base can cause the product to fall. resulting in serious personal injuries as well as damage to the product. Use only a cart. stand, tripod, bracket or table recommended by the manufacturer or sold with the product.
IMPORTANT SAFETY INSTRUCTIONS _, Outdoor Antenna Grounding If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the leadqn wire to an antenna discharge unit, size of grounding conductors, location of antenna-discha
iMPORTANT iNFORMATiON ........................... DEAR SHARP CUSTOMER .............................. iMPORTANT SAFETY iNSTRUCTiONS ............... Contents ...................................................... Trademarks ................................................... COPYRIGHT AND LICENSE NOTICE ............... Patent Notice ................................................ Supplied accessories .................................... Preparation ...................................................
Contents Secret number setting for parental control (AV input mode only) ........................... Parental control (setting V-CHIP level) ......... How to temporarily release the ',/-CHIP BLOCK ........................... Reactivating the temporarily released V-CHIP BLOCK ................................. Center Channel Input .............................. Other viewing options ................................. Viewing a list of Digital broadcast channels... Viewing information of the program ...........
Suppmied accessories Make sure the following accessories are provided with J i the producL iii RRMCGA264WJSA Page I3 QACCDA019WJPZ Page I0 Page I3 Only included with the LC-32GD4U and LC-37GD4U, LC_2_O4U L¢-26GD4U LHLDW0110CEZZ QCNW-A342WJZZ Pages 18 and 19 speakers attached.
First select the location where to place the TV. Selecting the location of theTV Select a place with no direct sunlight and good ventilation, Dispmay Setting Handling theTV in place the Display o Do not remove the stand and speaker from the Display unless using an optional bracket to mount it. o Keep enough space above and behind the Display, o When you move TV, carry out by two people or more than it, o When you move the Display, hold the portion of the Display, not the speaker.
After putting the Display in place, connect the AC cord, Use the cable clamp for bundling the cables. Press down the hooks to remove the cover toward you. Connecting the AC cord to the Display UUHUUUUUUUHUUU AC cold (with ferrite core) Bundling the cables with the clamp Cable clamp for LC-32GD4U/LC-37GD4U for LC-26GD4U ', TO PREVENT RiSK OF ELECTRmC SHOCK, DO NOT TOUCH UNqNSULATED PARTS OF ANY CABLES WiTH THE AC CORD CONNECTED.
"['he illustration shows the LC=32GD4U, 5 Remove the terminal illustration, cover as shown in the Attach the speaker terminal cover. 2 Insert the projecting bulges on the side of the speakers into the corresponding slots in the display, Align hub of the bracket with the groove and slot it into place, 3 1 Screw (SILVER) Fasten the screw, Fasten the bracket 4 8 Fasten the speaker cable with the holder.
Preparation Before detaching (or attaching) o Do not remove the stand from Before o Before o Before being stand, unplug the AC cord from the AC input terminal. the Display unless using an optional wall mount bracket to mount it, attaching/detaching stand performing work make sure to turn off the TV. performing work spread cushioning over the base area to lay the Display on, This will prevent it from damaged. 2 Unfasten the four screws stand in place.
If the remote control unit+ control fails to operate 1 Open the battery cover, Liquid 2 Crystal Television functions, replace Insert two "AAA" size batteries (supplied with the product), + Place the batteries 3 the batteries in the remote Close the battery cover, with their terminals corresponding to the (÷) and ( indications in the battery compartrner/t, ) Improper use of batteries can result in chemical leakage or explosion, Be sure to follow the instructions below.
Part names * The examples use throughout VOLU _) _ CHANNEL this manuaW are based on the 32GD4U model ib/N,tP(_ rli/ buttons POWER button (CHV/A) U POWER h-/dicator OPC indicator SLEEP indicator *OPC: Optical Picture Control (See page 33.
Part names --I LC-37GD4U LC-32GD4U i.LINK terminals (, INPUT 3 terminals r7.... iTU'?: MONITOR OUTPUT terminals _J _J _o INPUT 1 terminals ......... :;: _ . CableCARD slot INPUT 2 terminals ANT/CABLE 75 £_ DIGI rAL terminal I i,jI } LC-26GD4U MONITOR OUTPUT terminals * Instead of AIR IN and CABLE IN terminals, the LC-26GD4U has an ANT/CABLE 75 £_ DIGI rAL terminal, INPUT 3 terminals B INPUT 1 terminals I .......
Part natTt@S 1 TV POWER: Switches the Liquid Crystal Standby, (See page 20.) power on or 1 17 LIGHT --18 4---19 2 DISPLAY: Displays 3 SOURCE equipment POWER: ]_Jrns the power on and off. information, 4 Externam equipment operationam the external equipment, 5 0 6 A-ANALOGoB: antenna. 7 VOL +/_ 8 CARD: 9 mNFO: Displays page 85,) 10 Nrlvirtuah page 36,) of the external buttons: Operates 9: Sets the channel.
Watching TV Simple operations for watching a TV program To enjoy a clearer picture, use an outdoor antenna, The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the AVC System, ,, The antenna and the cable converter cannot be connected at the same time. F-type connector 1.
f A-2. Connecting with cable converter using AUX terminals for audio and video output. (If your cab[eTV converter has both RF OUTPUT and AUX terminals, it is recommended shown in example A-I.) to connect it as ,, Be sure to remember what kind of connection is made with your System.
f C. Connecting Antenna Cabme with VCR fRF Cab1÷ (Suppliedl Audio Cab4e /c_r nlercia41y avaJlabl®) ,, Be sure to remember what kind of connection is made wkh your System. ,_ Shown here is the preferred rnethod of connecting a VCR to your TV if you are in an area with good signal reception. This way you can view either TV programs or VCR tapes and not be concerned about the position of the VCR's T\/#/CR switch and you can enjoy stereo tape playback from stereo VCR.
Display Press POWER on the Display. POWER indicator (Blue): The TV is on (After appears with sound.) o POWER indicator (Off): The TV is in standby remote control POWER a few seconds, a window Press TV POWER on the POWER indicator FO'_ER SEEP OPC CARD ® o o o o The initial setup starts when the TV powers on for the first time If the TV has been turned on before, the EZ setup will not be invoked See page XX to try EZ setup from the Setup menu n O O Press TV POWER on the remote control.
When you turn on the TV for the first time, it will automatically memorize the broadcasting channels live. Perform the following steps before you press TV POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 13.) 2. Connect the antenna cable to the Display. (See pages 17 to 19.) 3. Plug in the AC cord to the AC outlet. (See page 10.) Language setting Select from among 3 languages: Spanish.
Watching TV You can change channels in several ways. ,, While watching a broad cast, press AoANALOGoB the image received from the other tuner, to view /ko oo,j Method 1 Using CFIi_/V display. Method 1. Press channel. 2. Press currently again to switch back to the has been Method 3 Using remote control buttons (0-9 andENTER) to select up to 125 channels for VHF/UHF/CATV.
I Using MUTE on the remote controm unit l Changing You can change the volume remote control unit, l Mutes the vomume the current sound output, on the Display or on the Using VOL +/Display _/f ......................
,, MTS only operates The TV has a feature that allows reception of sound other than the main audio for the program, This feature is called Muki-channel Television Sound (MTS), The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP), The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information, You can enjoy Hi=Fi stereo broadcasts where available, ,, Stereo broadcasts
Digital Cable Module is called CableCARD. By attaching the CableCARD, you can receive various digital services provided by your Cable Company, To obtain and use a CableCARD you need to first submit an application. Please contact your cable company to discuss receiving and application. Digital Cable allow you to tune digital and high-definition cable channels through the cable antenna. This module is called the CableCARD. Press MENU and the MENU screen appears.
Basic adjustment settings [_ootion ] List of AV menu items to hemp you with operations [_ Picture Audio Only ..................................... Digitam Noise Reduction ............... HDMI Setup .................................... input Select .................................... Output Select ................................. Quick Shoot ................................... Center Channel Input ................... Page Page Page Page Page Page Page 70 70 54 66 71 71 84 Caption Setup .........
Basic adjustment settings [5 Power Control [ You can run EZ Setup again, even after setting up the preset channels. //oooj ®QO I_ setupI Speaker Setup ............................... Input Signal ................................... Auto Sync ...................................... Input Label ..................................... Fine Sync ....................................... Picture Flip.................................... Language .......................................
Basic adjustment settings Antenna setting Make s/ire what kind of conr_ectiorl is made with yo_JrTVwhen selecting "Air" or "Cable" for ANALOG-A, B arid DIGITAL Press _/11_ to select "Air" or "Cable" for ANALOG-A, then press _/T to move down. Press 4/_ to select "Air" or '
Basic adjustment settings Channel ,, Make sure what kind of connection is made wkh your TV when sebcting "Air" or "Cabb" for both ANALOG-A, B and DIGI rAL, ,, There are 3 kinds of CATV system, including Standard, HRC and IRC. Select the one matches to your TV Select Auto when you do not know which one to sebct. Channel search Channel auto search makes the System look for all channeB vbwable in the set area.
Basic adjustment settings This function allows you to program 4 favorite channels, in 4 different categories, By setting the favorite channels in advance, you can select your favorite channels easily, [][IVliual _ Press ,A/T'/4/_ to select the channel you want to delete, and then press ENTER, MENU 0 0 Press 4/1_ ENTER. to select "Yes", and then press Yes s6P A 5o 1 Select the channel you want to register as a favorite channel.
Basic adjustment This function antenna. settings allows you to set the connected digital Press MENU and the MENU screen displays. Press _/1_ to select "Setup", Press ,A/Y to select "Antenna DIGITAL", and then press ENTER, Setup - ® If you already set the Secret No., input the 4digit secret number here, See page 77 for setting a secret number, Press ,&/_ to select "Ant. Power Setup", and press ENTER, Ant. Power Setup When the Lebel indicator ENTER.
Basic adjustment settings Press MENU and the MENU screen displays, Adjusts the picture to your preference with the following picture settings, E_ R_RN FAVORITE CH Press _/_ to select "Picture", Press _,/V item, to select a specific Press _/_ position, to adjust the item to your desired adjustment ,, For resetting all adjustment items to factory preset values, press A/_ to select "Reset", press ENTER, press ,,q/_ to select "Yes", and then press ENTER, Adjustments items for AV source Adjustmen
Basic adjustment Automatically settings adjusts the brightness of the screen, Color tone is managed setting. using the six-color adjustment Press MENU and the MENU screen displays, Press MENU and the MENU screen displays, Press _1/_ to select "Picture". Press _1/1_ to select "Picture", Press _,/'V to select "OPC", Press _/V to select "Advanced", press ENTER, and then Press _1/1_ to select "On" or "On: Display", Press ,A/T' to select "C.M,S-Hue", and then press ENTER ,_You can select "C.M.
Basic adjustment For a better correction, white settings balance, use color temperature For easier viewing, change the viewing depth by selecting a level for automatically adjusting the dark portion of an image. Press MENU and the MENU screen displays.
Basic adjustment settings For viewing a video in monochrome, Adjusting the image and input signal can give you a more beautiful picture, Press MENU and the MENU screen displays.
Basic adjustment settings You can adjust the sound with the following settings. quality to your preference Press MENU and the MENU screen displays.
Basic adjustment settings Power control setting Power control setting allows you to save energy, allows you to save energy, Power management When set, the power will automatically No signal When set to "Enable", the power will automatically down if no signal inputs for 15 minutes, shut Repeat steps 1 and 2 in No signal Press MENU and the MENU screen displays.
Basic adjustment settings (DIGITAL) REC Picture Size Select the screen size to record on 16:9 video, This setting allows you to set the image broadcasting. of Digital Press MENU and the MENU screen displays. You can adjust the settings Screen for Digital image, Press _/1_ to select "Digital Setup". Size Set the format of image of Digital broadcasting. Press A/T to select "Video Setup", and then press ENTER, Press MENU and the MENU screen displays.
Basic adjustment settings (DIGITAL) Select the optical digital audio of Digital broadcasting, Press MENU and the MENU screen displays. Press _/1_ to select "Digital Setup". Press _/V to select "Audio Setup", and then press ENTER, Press _/V to select "PCM" or "Dolby Digital", and then press ENTER zzzzzzzzzzzzzzz _- PCM Dolby The optical putput terminal outputs audio signal by PCM form. If your digital audio sysytem does not support Do%y Digital, select "PCM".
Using memory card o We will not be liabb for misuse of the LCD TV set, any troubles during use, or other problems, or any damages arising out of the use of the LCD TV set, except for the cases for which we are liable by statute, o If you or other people misuse the LCD TV set, or the LCD TV set is affected by static electricity or electrical noise, the recorded data may be in danger of being changed or lost, o If you are making a record of importance, run a test in advance to ensure that the recording would
Using memory card You can use memory cards (commercially available) for recording and playing back pictures, o Please use an appropriate PC card adapter (commercially available) for each memory card, o Following memory cards are available, (Note that names for memory cards vary depending on manufacturers.
Using memory --Still card Setup Slide Show _ Interval ! -- 1- 10/15/20/25/30/ 45/60 Sec. 15/30/60 My Program Normal/Random/ On/Off Order Repeat --My Card -Setup Program --Audio --File --Video Setup ---T_Rec.
Using memory Opening card the PC CARD slot cover Use 'your fingertip the arrow. to slide the catch in the direction Ejecting of the card o Make sure the card indicator lights up green. Press EJECT button. ,_ EJECT button is popped up. EJECT button mnaerting a PC card adapter iiiiiiiiii o Press in the EJECT button if it is popped out. o Insert a memory card to a PC card adapter beforehand. (See page XX.) o Insert the PC adapter card slowly. PC CARD slot I -_Z, Press EJECT button again.
Using memory You can record card a still image on the card, Press CARD and the card mode screen displays, (3O CE) EE) VOL Press 4/_ ENTER, CH to select "Still", and then press Press ,&/T/4/_ to select a file you want to display, and then press ENTER, M_U E8 R_URN FAVORITE CH -WIN_CUNESELECTFREEZE CC _] _CD SLEEP AUDIO AVMODE ,_ To display the files that are in the previous or next page, select ,,q/_ on the index screen and press ENTER.
Using memory card You can adjust the interval, order and repeat settings. Press CARD displays, and the card mode You can select up to thirty-two pictures the order for displaying in slide show. and specify screen Repeat steps 1 to 4 in Setting Slide Show, Press MENU and the MENU screen displays.
Using memory card You can protect any file you do not want to delete. Repeat steps 1 to 5 in Protecting picture files, Repeat steps 1 to 4 in .Audio Seteet. Press ,A/Y to select then press ENTER. "File Operation", and still Press _,/T to select "Delete All", and then press ENTER, Press _/11_ to select ENTER. "Yes", and then press ,, You cannot delete a protected file on the card.
Using memory card S_'URCE LIGHT Press CARD displays, REC @ VOL Press _/_ ENTER, and the card mode screen to select "Video", and then press CH Press A/?'/4/I_ to select the file you want to play, and then press ENTER ,_Video playback starts, EO Press CARD again to display the operation panel. ,_ See page XX for the operation panel information. ,_When viewing a motion picture, by pressing VIEW MODE the picture size changes.
Using memory card You can record the picture slightly before the point where you pressed the record button, enabling you to record just the scene you wanted. You can protect any file you do not want to delete.
Using memory card L Repeat step 1 to 5 in Protecting picture files, motion Press MENU and the MENU screen displays, Press _,/T to select "Delete File", and then press ENTER. Press _/ll_ Press ,A/?'/_/I_ to select the file you want to delete, and then press ENTER. Press ,A/T' to select "Format" and then press ENTER. Press _/ll_ to select "Yes", and then press ENTER. Press _/_ ENTER. Repeat the operations above.
Using e×temam equipment You can connect many types of external equipment to your System, like a DVD player, VCR, Digital TV tuner, PC, HDMI equipment, game console and camcorder, To view external source images, select the input source from INPUT on the remote control unit or on the Display, Selecting Explanation here is for the setting DVD to INPUT1 terminal. when connecting the INPUT signal Press MENU and the MENU screen displays, Press 4/11_ to select "Option".
Using external equipment You can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals audiovisual equipment. When using component when connecting to a DVD player and other cable, DVD player When using composite cable, U AV cable (cor'nrr/ercially available) DVlD player When using DVl cable, (INPUT 5) o35mm stereo minijack cable _ (cor'_/mercially available) Lo DV O be (Comr'_ercially available) DVD player ,_ See page terminal.
Using external equipment You can use the INPUT 3 terminal when connecting a VCR and other audiovisual equipment, ,, The S-video terminal has priority over the video terminals, S-video cable (commercially available) AV cable (commercially 0 available) @@@ VOR A game console, camcorder INPUT 3 terminals, and some other audiovisual equipment are conveniently ,, The S-video terminal has priority over the video terr_finals, • "1iilii' 1_ ,,,I S-video cable (cor'_/mercially available) FO
Using external equipment You can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals audiovisual equipment, When using component a Digital TV STB and other cable, Digital When when connecting using composite cable, TV STB L AV cable (commercially available) @@@ Digital TV STB When using DVl cable, (iNPUT 5) _;3.
Using e×temam equipment You can use the INPUT 4 terminal when connecting an HDMI equipmenL HDMI equipment HDMI cable (Commercially available) Press _,/_' to select the desired item and press ENTER, To watch an HDMI equipment image, select "INPUT4" from "INPUT SOURCE" menu using INPUT on the remote control unit or on the Display, (See page 66,) Press ,A/V/4/_ to select the desired setting and press ENTER, SignaE Type Auto/RGB/YCbCr 4:4:4/YCbCr 4:2:2 Select the signal type from an HDMI terminal Unl
Using e×ternal equipment Use the INPUT 5 terminal to connect ,, Refer to page 81 for a list of PC signals a PC, compatible with the TV.
Using external equipment Up to !6 D-VHS decks can be connected using a daisy-chain connection with i.LINK cables. i.LINK is an interface connection using a serial transfer system and is able to transfer multimedia data, such as digital images and digital sound, between devices that have i.LINK terminals. i.LINK is a term defined in the IEEE 1394 (Institute of Electrical and Electronics Engineers) standard.
Using e×ternam equipment o The function for automatically adjusting the recording mode of connected D-VHS decks can be turned on or off.
Using external equipment o In order to control a D-VHS deck from the TV, you must first choose the D-VHS deck to be controlled. o One D-VHS deck can be chosen from up to 16 i.LINK connected decks. o All D-VHS decks connected with i.LINK cables should automatically appear in the selection screen. Press i°LINK to display the i,LINK control panel. Devices that cannot be used with this TV will not appear in the selection screen.
Using e×ternam equipment Press _1 to select "Delete", ENTER, o Preset D-VHS decks can be selected from a list. o If a D-VHS deck is connected, it cannot be deleted from the list. Press i°LINK to display panel. the kLINK and then press ,, The selected D-VHS deck is deleted from the list. ,, Select "Cancel" to undelete a device. control Press _,/Y/_/I_ to select "Selecting device", and then press ENTER.
Using external equipment ,, Even when a connected D-VHS deck is playing, input signal can be switched to digital broadcasting by shifting the cursor to the input selection button and pressing ENTER. ,, This TV may not be able to operate some D-VHS decks using the control panel, orto display picture and/or sound input from some D-VHS decks. ,, Depending on the D-VHS deck, this TV's i.LINK may not allow viewing of VHS and S-VHS tape or analog recorded D-VHS tape.
Using external equipment o Before commencing this procedure, the steps in "i,LINK Setup" on page 58 need to be completed beforehand, o Please also refer to the operation manual of the DVHS deck to be used with this TV, Select a digital Press i,LINK panel. program to display Press _,/V/_/_ ENTER, to be recorded, the i.LINK to select 0, control and then press ,, Recording starts, ,, Select 0 and press ENTER to stop recording. ,, Input mode cannot be switched to i.LINK during recording.
Useful adjustment settings You can move the picture around on the screen, For adjusting position. a picture's horizontal and vertical Press ,A/_r/4/_ to move an image on the screen to the desired position. Press ENTER to return to the initial image position. Press MENU and the MENU screen displays, Press 4/1_ to select "Setup", Press ,A/V to select press ENTER Press _,/V "Position", and then to select "H-Pos.
Usefum adjustment [_! settings II- _ dOHOHIOOIOH OO0000010HOHO0 OH I . q I I_ When using external speakers ,, Change the speaker setting to external speakers. (See page 64.) Make sure to connect the speaker terminal and cable polarity (+, ) properly ,, The speaker terminals have plus (+) and minus ( ) polarity. ,, Plus is red and minus is black.
Usefum adjustment settings Audio Quality Control automatically optimizes quality to suit internal (supplied) speakers, the audio Press MENU and the MENU screen displays.
Usefum adjustment For automatically settings adjusting the PC image, Press MENU and the MENU screen displays. Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync.
Useful adjustment settings DVi input signal setting Press iNPUT to select INPUT5, Display = VOL + _ CH A INPUT POWER mNPUT button Selecting input source Use this menu to select the input source, Press iNPUT, ® A list of selectable sources appears, Press MENU and the MENU screen displays, Press iNPUT again to select the input source, ,, An image from the selected source automatically displays, ,, You can also select the input source by pressing A/_.
Useful adjustment settings Lets you set the input terminal displayed INPUT SOURCE menu or channel display, OOO@ A-ANALOG-B VOL DIGITAL INPUT using the f You can set the orientation of the picture. Repeat steps 1 and 2 in Input Label, CH Press _,/T to select "Picture press ENTER Flip", and then Press ,A/V to select the desired mode, and then press ENTER, Standard]: Press MENU and the MENU screen displays. Press
Usefum adjustment settings AV MODE gives you six viewing options to choose from to best match environment of the System, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipmenL Press VIEW MODE, ,_ The View mode menu displays. Tile menu lists the view mode options selectabb for the type of video signal currently received. Press VIEW MODE or ,A/T while the View mode menu is still on the screen.
UsefuJ adjustment settings m l EXAMPLE TV VCR AUDIO _ input signal You can select the screen size, (640 x 480) CBL/SAT DVD 0 o FUNOTION 0 o SOURCE 00 LIGHT " Connect the PC before making adjustments, (See page 55.) ,, Sebctabb screen size may vary with input signal type. Normal REC (33(3[3(33 Press VIEW MODE, ,_The View mode menu displays. Input signal (1024 x 768) C®8 FAVORITE [EXAMPLE Press VIEW I_IODE or _,/_' desired item on the menu.
Useful adjustment settings ,, Some input signals may have to be registered manually to display properly, ,, Tile pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when tile same signal (resolution) is input again, Produces a clearer video image, Press MENU and the MENU screen displays, Press _/1_ to select "Option".
Useful adjustment settings Allows you to select what controls the audio outpuL Allows you to set a time when the TV automatically switches to standby, Press MENU and the MENU screen displays. Press _1/1_ to select "Option". Press ,A/Y to select then press ENTER, "Output Select", and Press SLEEP, Press 4/_ to select "Fixed" and then press ENTER, or "Variable", Remaining time displays when sleep timer has been set.
Useful adjustment settings Select the CH display for Digital broadcasting, Press MENU and the MENU screen displays. Press _/1_ to select "Setup".
Useful adjustment settings o Your TV is equipped with an internal closed caption decoder.
Useful adjustment Select a caption settings size, Select a font style. Press MENU and the MENU screen displays. Press MENU and the MENU screen displays, Press _1/1_ to select "Option". Press _1/1_ to select "Option". Press _,/V to select "Caption Setup". Press _,/V Press _,/V to select "Caption Size", Press _,/'_' to select "Font Style". Caption Size 41 Default to select "Caption Setup".
Usefum adjustment Select a character settings foreground color, Select a foreground opacity value. Press MENU and the MENU screen displays. Repeat steps 1 to 3 in Foreground Press _/1_ to select "Option". Press _/V Press A/_ to select "Caption Press A/V to select "Foreground Foreground Color Color". Default ', Defauk: The foreground opacity value specified by broadcasting station or defauk opacity value.
Useful adjustment settings Select a background opacity value, Press MENU and the MENU screen displays. Press 4/1_ to select "Option". Press _,/V to select "Caption Press _,/V to select "Background Background Opacity Setup". 41 Opacity", DefauR I_ j Press 4/1_ to select the desired value. ,, Default: The background opacity value specified by broadcasting station or defauk opacity value.
Usefum adjustment settings Allows you to use a secret number to protect settings from being accidentally changed. Select "New Secret No,", and then press ENTER, Input the new 4-digit secret number by using 0-9, certain New Secret IMPORTANT: Three conditions must be met to enable V-Chip pages 79 to 83): d} Secret No, is registered, _2}V-Chip settings have been made, (3} "Status" is set to "On", No. (see Input the same 4-digit number on the "Reconfirm" screen as in step 5 to confirm, New Secret No.
Useful adjustment settings Clearing @@@ ®®@ riD@@ @ @ @/ A-A_OG-B DIGItaL U_pUT ¢®g FAVORITEOH 0000 Changing the secret the secret number Allows you to clear your secret number, Repeat steps 1 to 3 in Settin 9 a secret number. Secret number setting menu displays. number Allows you to change your current secret number. Input the 4-digit 9. secret number by using 0 - Repeat steps 1 to 3 in Settin 9 a secret number, ,_ Secret number setting menu displays.
Usefum adjustment settings V-CHIP is an electronic filtering device built into your TV, This tool gives parents a great degree of control over broadcasts accessed by their children, It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the \/-CHIP feature in your Liquid Crystal Television, "V-Chip" and "Status" wHmnot be se{ectable from the menu if you do not first configure your secret number, (See page 7
Useful adiustment settings TV Parental FAVO_n_ CH system Press ,A/Y to select then press ENTER (MPAA) Press MENU and the MENU screen displays. Press _1/1_ to select "Setup". Press ,A/V press movie Q-I!Hg-(9 movie rating then (TV Guidelines) Repeat steps 1 to 5 in Voluntary rating system (MPAA), db_@ OA-A_OG-BODIGITAL_/ U_pUT OOOO Voluntary Guidelines to select "Parental "TV Guidelines", and Press _&/V to adjust the item to your desired position. "_" indicates the item is blocked.
Usefum adjustment Canadian settings Rating Systems o The TV rating systems in Canada are based on the Canadian Commission (CRTC) policy on violence in television programming, Radio-Television and Telecommurfications o While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudky, sexuality and mature themes, o When setting the V-CHIP on the Canadian system you can choose ekher the Canadian English ratings
Useful adjustment settings kkooo;; Q O Q _ _ _ _ 0000 Canadian O g (b_'_D-(_4b English Press ,A/V to adjust the item to'your desired position. "_" indicates the item is blocked. ,, The setting automatically enters "Block" for any ratings below your selection. If Status is not set to "On" the configuration settings will not work. (See page 77.) Example ratings Press MENU and the MENU screen displays. Press 4/1_ to select "Setup". Press ,A/T to select "Parental CTRL", and then press ENTER.
Useful adjustment settings TV Tv VCR o CBIZSAT o AUDIO o o DVD FINCTION o SOURCE 0 LEGH_" _ G Q o The V-CHIP BLOCK is working and censors a broadcast, "V-CHIP HAS BEEN ACTIVATED." displays. REC ® O Press ENTER while the V-CHIP is working and then the secret number setting menu displays, Q Q _ _ Enter your 4-digit secret number with 0 - 9 and then press ENTER At this time V-CHIP BLOCK temporanly releases.
Usefum adjustment settings You can use the display speakers as center speaker when using 5.1ch surrounding sound system, Display speaker * Connect to external audio equipment which supports 51ch surround sound system. Refer to your external equipment operation manual for details FAVORITE CH Press MENU and the MENU screen displays.
Other viewing options You You can view a list of all currently broadcast channels. watchable digital can view are currently information watching. about a digital broadcast you u G®8 EO R_RN FAVORITE Push OH LIST broadcasL FAVORITE CH CH while watching a digital ,_A list of all digital channels (over-the-air or cable) currently watchabb will be displayed. Air/Cable Press INFO broadcasL ,_ Information displayed.
Other viewing options i Picture Allows you to display one time, two pictures on the screen at and still image You can display and one still, two same-sized pictures -one moving Twin picture in all cases You can display two same-sized pictures except when inputting from INPUT 4 (HDMI) and INPUT 5 (DVI-I) terminals and CARD, @@@@ VOL A-ANAL(ZG-B tlpeSPAS°A 21 E OH DIGFAL Press iNPUT TWIN II II SlllJ PICTURE, ,, lwJn picture displays source image displays.
Other viewing options Presetting You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function for your remote control unit. TV TV CBL/SAT 0 0 VCR DVD 0 0 SOURCE AUDIO FUNCTION 0 manufacturer codes Press FUNCTION device lights up, until the LED for your After the LED for your device lights up, if you press FUNCTION for three seconds and enter the code registration mode, the LED will blink.
Other viewing Manufacturer options codes VCR BRAND Akai Audio Broksonic Canon Capehart Craig Curtis Mathis Daewoo DBX Dynatech Emerson Fisher Funai G.E.
Other viewing options Cable control When the FUNCTION converter 1 to4, 1 buttons connected SOURCE is set 3 the cable operate using power on and off, 0 9 Press a button (or buttons) that corresponds channel that you wish to watch, FLASHBACK* Press to switch channel 4 can POWER Turns the came corwerter 2 to CBL/SAT to the Display between you were watching the current * Some manufacturers ,, CABLE do not preset and SAT cannot channel immediately OH A/_' Press CH A or CH T to tune
Other viewing options VCR control 8 The remote buttons control when the FUNCTION to VCR. unit button will function of the remote o When the input selector button having number as the input terminal connecting pressed, the VCR can operate 1 014 A/T Press to select the channel 2 SOURCE as follows control using unit is set the same the VCR is 1 to 8, of the TV tuner on the VCR. POWER Turns the power of the VCR on arid off, 3 Sets pauses 4 Rewinds 5 and still pictures.
Other viewing options 3 DVD control 10 buttons The remote control unit button will function as follows when the FUNCTION of the remote control unit is set to DVD. o When the input selector button having the same number as the input terminal connecting a DVD player is pressed, these players can operate using 1 to 10_ Pressing quickly once takes you to the start of the next chapter. Each time you press it, you move ahead to the start of the next chapter.
Problem Possible No power ,_ Check if you pressed TV POWER on the remote control unit, (See page 20,) If the indicator on the Display lights lip red, press TV POWER on the remote control unit, Is the AC cord disconnected? (See page Has the main power been turned Unit cannot Remote be operated.
PC/MAC Resolution PC 640 x 400 720 x 400 VGA 640 x 480 WVGA SVGA 848 x 480 800 x 600 XGA WXGA 1024 x 768 1280 x 720 1280 x 768 SXGA 1280 x 1024 MAC13" VGA 640 x 480 MAC16" MAC19" SVGA XGA 832 x 624 1024 x 768 HorizontaIFrequency 31,5 kHz 37,9 kHz 31.5 kHz 37,9 kHz 31,5 kHz 37,9 kHz 37,5 kHz 43,3 kHz 31,5 kHz 35,1 kHz 37,9 kHz 48_1 kHz 46.9 kHz 53,7 kHz 48.4 kHz 56.5 kHz 60,0 kHz 68,7 kHz 45,0 kHz 48,1 kHz 64,0 kHz 34,9 kHz 49.
PC Control of the System o When a program is set, the Display can be controlled from the PC using the RS-232C terminal. The input signal (PC/AV) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. o Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections.
Response code format Normal response to!Kl i Return code (0DH) Problem response (communication error or h-lcorrect command) IE!R!RI'=I Return code (0DH) Command table ,, Commands not h/dicated here are not guaranteed to operate, CONTROL POWER ITEM SETTING INPUT SELECTION A TOGGLE NPUTI 5 LINK B O! I[T[G[D x[ I [ A [ V [D L[I[N[K CARD SELECTION PARAMETER P!O!W!R [ {To!_ g]le) i= [ Input x[ i= [ xi 2 NPUT i l 01 i i AUTO l ' 1 i l l VIDEO i i i "2 i i i COMP
Item LCDpanel Model: LC-37GD4U Model: 37" Advanced Super View & BLACK TFT LCD Number ofdots TV TV-standard Function Receiving Channel (CCIR) VHF/UHF CATV 3,147,264 dots (1366 American TV Standard VHF 2-13ch, LC-32GD4U 32" Advanced Super View & BLACK TFT LCD x 768 BJlodel: LC-2¢GD4U 26" Advanced Super View & BLACK TFT LCD x 3 dots) A-rSC/NTSC System UHF 14-69ch 1-125ch Digital Terrestrial2-69ch i Br0adcast/8VSB) Digitalcable 1-135ch (64/256 QAM) Audio multiplex BTSC System Brightness
Dimensionam drawings LC-37GD4U Unit: inch/(mm) 671 1102 917 115 III, 307 2OO -97
Dimensional drawings LC=32GD4U Unit: inch/(mm) U 980 795 115 307 oI Q -98
Dimensional drawings LC-26GD4U Unit: inch/(rnm) 848 663 508 ! o I u o ilnllln IIIII o {D -99
HOW'TO SET THE FACTORY PRESETS Turn off the Display by pressing POWER, Press and hold down RESET and press POWER on the Display to turn on the TV. All setting items (except TV channel) return to the factory presetting, Running the factory presetting operation also clears the secret number, You can run the EZ Setup again by using the following steps.
Calling for Service For location customer of the nearest assistance, Sharp please call Authorized Service, or to obtain product litera.ture, accessories, supplies, or 1-800-BE-SHARP.
V__ ® UMITED Consumer WARRANTY E/ecCronicsProducts Congratulations on your purchase! Sharp Electronics of Canada Ltd. (hereinafter called "Sharp") gives the following express warranty to the first consumer purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer: Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.
