Manual

Preparation
LC=37G4U
1
f
Peel off the tape holding the ends of the cables,
and move cables towards behind the display.
2
Hook the hole of the speaker to the screw of the
Display.
3
Turn the speaker to the front of the Display
(direction of the arrow) and fit it to the screw hole.
4
Fasten the screws.
5
Fasten the speaker cable with the holder.
,, Connect the ends of the cables to the speaker
terminals as shown in the illustration.
6
_ I L, t jl
Fix the speaker terminal cover.
Align the nub of the bracket into the groove and
fasten it.
8
Fasten the bracket with the screw.
• Perform the same steps for right speaker.
• To remove the speakers, perform the steps in reverse order. (_-9