Manual

Useful adjustment settings
Display
- VOL + _" Clt _ I T POWER MAIN POWER
i
INPUT button
Selecting input source
Can use for selecting the input source.
DVI input signal setting
Press INPUT to select INPUT5.
Press iNPUT on the remote control unit or
on the Display.
Press iNPUT on the remote control unit or
on the Display to select the input source.
• An image from the selected source
automatically displays.
o You can also select the input source by
pressing A/T.
- Some items may be grayed out. They are not selectable.
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1 or 2 terminals.
Press MENU and the MENU screen displays.
Press 4/I_ to select "Option".
INPUT5
Press MENU and the MENU screen displays.
Press ,&/Y/4/I_ to select "Option".
Press _/Y to select "Input Select", and then
press ENTER.
Option
[ANALOG PC]
Press A/'V' to select "Input Select" and then
press ENTER.
Press A/V to select a signal type /ou want
to set, and then press ENTER.
• If the selected signal type is incorrect, an image
does not display or no color image displays.
- The System automatically sets input signals from
"INPUT1" and "INPUT2".
, If no (color) image displays, try to change the signal
type.
- Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to "Auto"
when other equipment is connected will result in the
following connectivity priority.
1. COMPONENT VIDEO
2. VIDEO
i
1. DIGITAL PC
2. ANALOG PC
3. DIGITAL AV
4. ANALOG AV
Press A/T to select the equipment
connected to INPUT 5 terminal, and then
press ENTER.
Q -67