Manual

Watching TV
You can change channels in several ways.
[] Using FLASHBACK on the remote control
unit
Press FLASHBACK to switch the currently tuned
channel to the previously tuned channel.
Press FLASHBACK again to switch back to the
currently tuned channel.
- While watching a broadcast, press ANT-A/B to view the
image received from the other tuner.
Press FLASHBACK to toggle between the currently
selected input source and the previously selected one.
(Z)
A-ANT-B INPUT
@@ O
VOL OH
131tVirtual MENU
° d::::Z:::b O
C 9
0N
[] Using CH/'x/V on the remote control unit
• Press CH/_ to increase the channel number.
• Press CH v to decrease the channel number.
- CH V//X, on the Display operates the same as CH/_/
V on the remote control unit.
Display
-- VOL + INPUT POWER MAIN POWER
CH V/A
[] Changing channels with CH/'x/V on the
remote control unit or CH V/ix, on the
Display
Air: Press CH /_ and the channel change in the
order shown below:
2-+3-+...-+68-+69-+2-+3...
Press CH V and the channel change in the
order shown below:
3-+2-+69-+68-+...-+3-+2...
Cable:Press CH /_ and the channel change in the
order shown below:
1-+2-+3-+...-+125-+1 -+2-+3...
Press CH V and the channel change in the
order shown below:
3-+2-+1 -+125-+...-+3-+2-+1 -+...
• FLASHBACK will not work if no channel has been
changed after the System is turned on.
[] Using 0 - 9 on the remote control unit
Select the channels directly by pressing buttons 0 to
9.
• The System allows you to select up to 125 channels
(1 to 125). To select a channel, enter a 2 or 3-digit
number.
I EXAMPLE [_
To select a 1 or 2-digit channel number
(e.g., Channel 5):
Complete the following steps within 3 seconds.
Press the 0 button.
• Complete the step 2 within 3 seconds after the
step 1.
Press the 5 button.
%--_050
Press ENTER to enter the setting.
• Channel selection will be made if there is no
operations for 3 seconds.
When selecting a 1-digit channel number, do not fail to
press the 0 button.
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following steps within 3 seconds.
Press the 1 button.
• Complete the step 2 within 3 seconds after the
step 1.
Press the 1 button again.
- Complete the step 3 within 3 seconds after the
step 2.
Press the 5 button.
Press ENTER to enter the setting.
- Channel selection will be made if there is no
operations for 3 seconds.
Q -26