Manual

Preparation
How to install the AVC System vertically using the stand unit.
• Use the supplied stand unit for installing the AVC System vertically in an upright _esition.
f
Stick each spacer to the
stand as shown.
Peel each spacer away from the paper
and attach to the four bulging areas
on the stand.
spacer
ge
Bulge
_>
Attach the stand using the
stand screws as shown.
_ ew
Attach each cushion to
the stand as shown.
Peel each cushion
away from the
paper and attach i_ T
to the four areas _ Stand cushion
at the bottom.._J
ttach
Fit the stand to the AVC
System.
Insert the stand into the AVC
System, making sure that the
thick and thin bulges of the _,
stand align with the big and//\ Bulqe
sma.ho,esontheAVO_ _:
System_
The AVC System installed
vertically with the stand.
°111
• When mounting the AVC System vertically, always use the supplied stand. Be careful not to block vent holes when
standing up directly on the floor or a flat surface as this can result in equipment failure.
Q-13