Flat Panel Television User Manual
36
Appendix
Troubleshooting-DVD
Problem Possible Solution
•  Playback doesn’t start. •  No disc is inserted. (See page 26.)
•  The disc may be dirty. Clean up the disc. (See page 7.)
•  The TV/DVD cannot play CD-ROMs, etc. (See page 6.)
•  No picture. •  TV/DVD selector is not set correctly. (See page 26.)
•  No sound. •  Check the input selector of the amplifier is set properly.
•  The TV/DVD is in the special playback mode. (See page 27.)
•  Select the correct Audio Output position on AV amplifier. 
•  Picture is distorted during fast
 reverse/forward playback.
•  The picture will be distorted occasionally.
•  Stopping playback, search, 
slowmotion play, repeat play, or
  program play, etc. cannot be
 performed.
•  Some discs may not do some of the functions.
•  No on-screen display. •  Select Display to On. (See page 32.)
•  No surround sound. •  The setup does not match your stereo system.
•  The TV/DVD or remote operation 
key is not functioning.
•  Turn off the TV/DVD and unplug the AC power cord for several minutes, then 
replug it.
•  Playback does not start when the
  title is selected.
•  Check the Parental setup. (See page 33.)
•  Audio soundtrack and/or subtitle
  language is not changed when
  you playback a DVD.
•  Multilingual language is not recorded on the DVD disc. (See page 28.)
•  No subtitle. •  Some discs have no subtitles. (See page 28.)
•  Subtitles are cleared. Press SUBTITLE. (See page 28.)
•  Angle cannot be changed. •  Multi-angles are not recorded on the DVD disc. (See page 28.)
• “ 
 ” appears on the screen. •  The function is prohibited with the TV/DVD or the disc. (See page 26.)
The password is
NOTE 
•  As a precautionary measure, make a note of your password above, cut it from this manual, and keep it in a safe place.
.
CLEARING THE PASSWORD
If you forget the password, clear the password using the following procedure.
1
Press and hold both VOL – on the TV/DVD and press 0 on the remote control simultaneously for a few 
seconds until 
MENU screen
 appears on the screen.
2
Now the old password was cleared. You can set the new password.
(Illustration is LC-26DV27UT.)
52L0131B_P26_back.indd 3652L0131B_P26_back.indd 36 6/24/09 5:21:15 PM6/24/09 5:21:15 PM










