Manual

Before detaching (or attaching) stand, unplug the AC cord from the AC input terminal,
o Do not remove the stand from theTV unless using an optionam wall mount bracket to mount it.
Before attaching/detaching stand
o Before performing work make sure to turn off the TV,
o Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged,
Unfasten the screw used to
secure the bracket in place.
@
Unfasten the four screws
used to secure the stand in
p]ace.
3 (LC-37/32D7U)
@
Detach the stand from the
TV.
(Hold the stand so it wi]l not
drop from the edge of the
base area.)
(LC-26D7U)
Detach the stand from the
TV
(Hold the stand so it will not
drop from the edge of the
base area.)
o Do not remove the stand from the TV unless using an optional bracket to mount it,
]b attach the stand, perform the above steps in reverse order.
mnstaHing the Liquid Crystam Temevision requires speciam skill that should onRy be performed by qualified service
personnel Customers shoumd not attempt to do the work themsemves. SHARP bears no responsibility for improper
mounting or mounting that resuRts in accident or injury.
Using an optional bracket to mount theTV
_, You can ask a qualified service professional about using an optional AN-37AG2 bracket to mount the TV to
the wall, The AN-37AG2 is compatible with the LC-37D7U and LC-32D7U only,
_, Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-37AG2 wall mount bracket. (See the bracket instructions
for details.)
About setting theTV angme
LC-37D7U 5°
LC-32D7U 10°
i
Vertical mounting Angular mounting
(_ -90