Manual

Usefum adjustment settings
DVminput signam setting
1 8 °6E l/
_ - vo_ ÷ _ cl_ A i_PuT _OWER
Semecting input source
Use this menu to select the input source.
Press INPUT,
,, A list of selectabIe sources appears,
Press INPUT to select INPUT5.
Press INPUT again to select the input source,
,, An image from the selected source
automatically displays.
,, You can also select the input source by
pressing A/T,
,, If the corresponding input is not plugged ir/,
you cannot change the input. Be sure to
connect the equipment beforehand.
,, When the CableBox is selected in TV Guide
On Screen setting, CableBox will be displayed
in the INPUT SOURCE screen, If you select
Cab]eBox in the INPUT SOURCE screen you
can change the channels of the CabIeBox,
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1 and INPUT 2 terminals,
Press MENU and the MENU screen displays.
,_INPUT5
Press MENU and the MENU screen displays,
Press _/1_ to select "Option".
Press ,A/T to select "Input Select", and then
press ENTER,
Option
Press _/1_ to select "Option",
Press ,A/T to select "Input Select", and then
press ENTER,
Press ,A/V to select a signal type you want
to set, and then press ENTER
,, If the selected signal type is incorrect, images
are not displayed or displayed without any
color.
Press ,&/V to select the equipment
connected to INPUT 5 terminal, and then
press ENTER,
,, If you set INPUT1 and INPUT2 to Auto, the TV will
automatically select the input signal.
,, Check the operation rr/anual of the exten/al equipment
for the signal type.
,, Setting INPUT 1 and INPUT 2 signal selection to "Auto"
when other equipment is connected will result in the
following connectivity priority,
(_ -66