Manual

Using e×ternam equipment
Please use the INPUT 4 terminal when connecting HDMI equipment,
HDMI cable
(Commercially available)
HDMI equipment
To watch an HDMI equipment image, select
"INPUT4" from "INPUT SOURCE" menu
using INPUT on the remote control unit or
on the TV. (See page 66,)
INPUT4
Press MENU and the MENU screen displays,
Press _/_ to select "Option",
Press ,A/V to select the desired item and
press ENTER,
Press ,A/Y/_/I_ to select the desired setting
and press ENTER,
Signal Auto/RGB/YCbCr Select the signal type from
Type 4:4:4/YCbCr 4:2:2 an HDMI terminal, Unless
the image quality looks
obviously poor, select Auto
Color Auto/ITU601/ Select the internal color
Matrix ITU709 space conversion method
when an RGB signal is
input. Normally, select
Auto
Dynamic Standard/ Select the signal amplitude
Range Out of Standard range Normally, select
Standard
Auto View Enable/Disable Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal
Press ,A/?' to select "HDMI Setup", and then ,_ Refer to your external equipment operation manual for
press ENTER the signal type.
Option
(_ -56